Add device tree binding documentation for the OV5695 sensor.
Signed-off-by: Shunqian Zheng <zhengsq@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/media/i2c/ov5695.txt | 38 ++++++++++++++++++++++
1 file changed, 38 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ov5695.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/ov5695.txt b/Documentation/devicetree/bindings/media/i2c/ov5695.txt
new file mode 100644
index 0000000..ed27eb1
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov5695.txt
@@ -0,0 +1,38 @@
+* Omnivision OV5695 MIPI CSI-2 sensor
+
+Required Properties:
+- compatible: should be "ovti,ov5695"
+- clocks: reference to the 24M xvclk input clock.
+- clock-names: should be "xvclk".
+- dovdd-supply: Digital I/O voltage supply, 1.8 volts
+- avdd-supply: Analog voltage supply, 2.8 volts
+- dvdd-supply: Digital core voltage supply, 1.2 volts
+- reset-gpios: Low active reset gpio
+
+The device node must contain one 'port' child node for its digital output
+video port, in accordance with the video interface bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+&i2c1 {
+ compatible = "ovti,ov5695";
+ reg = <0x36>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&clk_24m_cam &wcam_rst>;
+
+ clocks = <&cru SCLK_TESTCLKOUT1>;
+ clock-names = "xvclk";
+
+ avdd-supply = <&pp2800_cam>;
+ dvdd-supply = <&pp1250_cam>;
+ dovdd-supply = <&pp1800>;
+
+ reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+
+ port {
+ wcam_out: endpoint {
+ remote-endpoint = <&mipi_in_wcam>;
+ data-lanes = <1 2>;
+ };
+ };
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
