Add bindings for producer/consumer for iio triggers. Similar with iio channels, the iio triggers can be connected between drivers: one driver will be a producer by registering iio triggers, and another driver will connect as a consumer. Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx> --- .../devicetree/bindings/iio/iio-bindings.txt | 52 +++++++++++++++++++++- 1 file changed, 51 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/iio/iio-bindings.txt b/Documentation/devicetree/bindings/iio/iio-bindings.txt index 68d6f8c..d861f0df 100644 --- a/Documentation/devicetree/bindings/iio/iio-bindings.txt +++ b/Documentation/devicetree/bindings/iio/iio-bindings.txt @@ -11,6 +11,10 @@ value of a #io-channel-cells property in the IIO provider node. [1] http://marc.info/?l=linux-iio&m=135902119507483&w=2 +Moreover, the provider can have a set of triggers that can be attached to +from the consumer drivers. + + ==IIO providers== Required properties: @@ -18,6 +22,11 @@ Required properties: with a single IIO output and 1 for nodes with multiple IIO outputs. +Optional properties: +#io-trigger-cells: Number of cells for the IIO trigger specifier. Typically 0 + for nodes with a single IIO trigger and 1 for nodes with + multiple IIO triggers. + Example for a simple configuration with no trigger: adc: voltage-sensor@35 { @@ -26,7 +35,7 @@ Example for a simple configuration with no trigger: #io-channel-cells = <1>; }; -Example for a configuration with trigger: +Example for a configuration with channels provided by trigger: adc@35 { compatible = "some-vendor,some-adc"; @@ -42,6 +51,17 @@ Example for a configuration with trigger: }; }; +Example for a configuration for a trigger provider: + + adc: sensor-with-trigger@35 { + compatible = "some-vendor,some-adc"; + reg = <0x35>; + #io-channel-cells = <1>; + #io-trigger-cells = <1>; + /* other properties */ + }; + + ==IIO consumers== Required properties: @@ -61,16 +81,38 @@ io-channel-ranges: IIO channels from this node. Useful for bus nodes to provide and IIO channel to their children. +io-triggers: List of phandle and IIO specifier pairs, one pair + for each trigger input to the device. Note: if the + IIO trigger provider specifies '0' for #io-trigger-cells, + then only the phandle portion of the pair will appear. + +io-trigger-names: + List of IIO trigger input name strings sorted in the same + order as the io-triggers property. Consumers drivers + will use io-trigger-names to match IIO trigger input names + with IIO specifiers. + +io-trigger-ranges: + Empty property indicating that child nodes can inherit named + IIO triggers from this node. Useful for bus nodes to provide + IIO triggers to their children. + For example: device { io-channels = <&adc 1>, <&ref 0>; io-channel-names = "vcc", "vdd"; + io-triggers = <&adc 0>, <&adc 1>; + io-trigger-names = "continuous", "external"; }; This represents a device with two IIO inputs, named "vcc" and "vdd". The vcc channel is connected to output 1 of the &adc device, and the vdd channel is connected to output 0 of the &ref device. +The device also connects to two IIO trigger inputs, named "continuous" and +"external". The continuous trigger is connected to the trigger output 0 of the +&adc device, and the external trigger is connected to the trigger output 1 of +the same &adc device. ==Example== @@ -78,6 +120,7 @@ vdd channel is connected to output 0 of the &ref device. compatible = "maxim,max1139"; reg = <0x35>; #io-channel-cells = <1>; + #io-trigger-cells = <1>; }; ... @@ -94,4 +137,11 @@ vdd channel is connected to output 0 of the &ref device. compatible = "some-consumer"; io-channels = <&adc 10>, <&adc 11>; io-channel-names = "adc1", "adc2"; + io-triggers = <&adc 0>; + }; + + some_other_consumer { + compatible = "some-other-consumer"; + io-triggers = <&adc 1>, <&adc 2>; + io-trigger-names = "edge-triggered", "pwm-generated"; }; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
