From: Honghui Zhang <honghui.zhang@xxxxxxxxxxxx> The hardware default value of IDs and class type is not correct, fix that by setup the correct values before start up. Signed-off-by: Honghui Zhang <honghui.zhang@xxxxxxxxxxxx> --- drivers/pci/host/pcie-mediatek.c | 12 ++++++++++++ include/linux/pci_ids.h | 3 +++ 2 files changed, 15 insertions(+) diff --git a/drivers/pci/host/pcie-mediatek.c b/drivers/pci/host/pcie-mediatek.c index fc29a9a..0ef33e4 100644 --- a/drivers/pci/host/pcie-mediatek.c +++ b/drivers/pci/host/pcie-mediatek.c @@ -74,6 +74,10 @@ /* PCIe V2 per-port registers */ #define PCIE_MSI_VECTOR 0x0c0 + +#define PCIE_CONF_ID 0x100 +#define PCIE_CONF_CLASS 0x104 + #define PCIE_INT_MASK 0x420 #define INTX_MASK GENMASK(19, 16) #define INTX_SHIFT 16 @@ -393,6 +397,14 @@ static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port) val |= PCIE_CSR_LTSSM_EN(port->slot) | PCIE_CSR_ASPM_L1_EN(port->slot); writel(val, pcie->base + PCIE_SYS_CFG_V2); + + /* Set up vendor ID and device ID for MT7622*/ + val = PCI_VENDOR_ID_MEDIATEK | (PCI_DEVICE_ID_MT7622 << 16); + writel(val, port->base + PCIE_CONF_ID); + + /* Set up class code for MT7622 */ + val = PCI_CLASS_BRIDGE_PCI << 16; + writel(val, port->base + PCIE_CONF_CLASS); } /* Assert all reset signals */ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index ab20dc5..000c5df 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2113,6 +2113,9 @@ #define PCI_VENDOR_ID_MYRICOM 0x14c1 +#define PCI_VENDOR_ID_MEDIATEK 0x14c3 +#define PCI_DEVICE_ID_MT7622 0x5396 + #define PCI_VENDOR_ID_TITAN 0x14D2 #define PCI_DEVICE_ID_TITAN_010L 0x8001 #define PCI_DEVICE_ID_TITAN_100L 0x8010 -- 2.6.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
