Hello Andrew,
On Thu, 21 Dec 2017 12:32:54 +0100 Andrew Lunn <andrew@xxxxxxx> wrote:
> > +Optional properties:
> > + - resets: A phandle to the reset control for the MAC
> > + - local-mac-address: See ethernet.txt in the same directory.
> > +
> > +Required subnode:
> > + - mdio: Device tree subnode with the following required properties:
> > +
> > +Example:
>
> It sounds like there should be some properties before the Example.
Indeed, this is my carelessness.
>
> Andrew
>
> > +
> > + ether: ethernet@65000000 {
> > + compatible = "socionext,uniphier-ld20-ave4";
> > + reg = <0x65000000 0x8500>;
> > + interrupts = <0 66 4>;
> > + phy-mode = "rgmii";
> > + phy-handle = <ðphy>;
> > + clocks = <&sys_clk 6>;
> > + resets = <&sys_rst 6>;
> > + local-mac-address = [00 00 00 00 00 00];
>
> Typically you would put a blank line here, before the mdio node.
Okay, I'll put it.
> > + mdio {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + ethphy: ethphy@1 {
> > + reg = <1>;
> > + };
> > + };
> > + };
>
> Andrew
Thank you,
---
Best Regards,
Kunihiko Hayashi
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
