Dear Krzysztof,
On 2017년 12월 21일 04:27, Krzysztof Kozlowski wrote:
> Convert all hex addresses in node unit addresses to lower case to
> fix warnings like:
> arch/arm64/boot/dts/exynos/exynos5433-tm2e.dtb: Warning (simple_bus_reg):
> Node /soc/video-scaler@13C00000 simple-bus unit address format error, expected "13c00000"
>
> Conversion was done using sed:
> $ sed -e 's/@\([a-zA-Z0-9_-]*\) {/@\L\1 {/' -i arch/arm64/boot/dts/exynos/*.dts*
>
> Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/exynos/exynos5433.dtsi | 8 ++++----
> arch/arm64/boot/dts/exynos/exynos7.dtsi | 4 ++--
> 2 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> index 1962b8074349..0ba5df825eff 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> @@ -994,7 +994,7 @@
> reg = <0x145f0000 0x1038>;
> };
>
> - gsc_0: video-scaler@13C00000 {
> + gsc_0: video-scaler@13c00000 {
> compatible = "samsung,exynos5433-gsc";
> reg = <0x13c00000 0x1000>;
> interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
> @@ -1008,7 +1008,7 @@
> power-domains = <&pd_gscl>;
> };
>
> - gsc_1: video-scaler@13C10000 {
> + gsc_1: video-scaler@13c10000 {
> compatible = "samsung,exynos5433-gsc";
> reg = <0x13c10000 0x1000>;
> interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
> @@ -1022,7 +1022,7 @@
> power-domains = <&pd_gscl>;
> };
>
> - gsc_2: video-scaler@13C20000 {
> + gsc_2: video-scaler@13c20000 {
> compatible = "samsung,exynos5433-gsc";
> reg = <0x13c20000 0x1000>;
> interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
> @@ -1049,7 +1049,7 @@
> power-domains = <&pd_mscl>;
> };
>
> - mfc: codec@152E0000 {
> + mfc: codec@152e0000 {
> compatible = "samsung,exynos5433-mfc";
> reg = <0x152E0000 0x10000>;
> interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> index 9a3fbed1765a..3504837b1d43 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> @@ -103,7 +103,7 @@
> #size-cells = <1>;
> ranges;
>
> - pdma0: pdma@10E10000 {
> + pdma0: pdma@10e10000 {
> compatible = "arm,pl330", "arm,primecell";
> reg = <0x10E10000 0x1000>;
> interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
> @@ -114,7 +114,7 @@
> #dma-requests = <32>;
> };
>
> - pdma1: pdma@10EB0000 {
> + pdma1: pdma@10eb0000 {
> compatible = "arm,pl330", "arm,primecell";
> reg = <0x10EB0000 0x1000>;
> interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
>
Looks good to me.
Reviewed-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
