The interrupt specification for the GPIO expander is wrong - the expander is wired to PTB28, which is GPIO98. GPIO98 is on gpio chip 3, not 2. In addition, the device is missing a required property. Interrupt controllers must have the "interrupt-controller" property specified. Add this. Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx> --- arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index acdf12ad0622..ede8649ba515 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -371,7 +371,8 @@ reg = <0x22>; gpio-controller; #gpio-cells = <2>; - interrupt-parent = <&gpio2>; + interrupt-controller; + interrupt-parent = <&gpio3>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; }; }; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
