This commit adds a check for clk_prepare_enable success and introduces an error path to disable the clock properly. Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx> Tested-by: Willy Tarreau <w@xxxxxx> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx> --- drivers/watchdog/orion_wdt.c | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-) diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c index f7722a4..7f19fa3 100644 --- a/drivers/watchdog/orion_wdt.c +++ b/drivers/watchdog/orion_wdt.c @@ -151,17 +151,24 @@ static int orion_wdt_probe(struct platform_device *pdev) clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(clk)) { dev_err(&pdev->dev, "Orion Watchdog missing clock\n"); - return -ENODEV; + return PTR_ERR(clk); } - clk_prepare_enable(clk); + ret = clk_prepare_enable(clk); + if (ret) + return ret; wdt_tclk = clk_get_rate(clk); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENODEV; + if (!res) { + ret = -ENODEV; + goto disable_clk; + } + wdt_reg = devm_ioremap(&pdev->dev, res->start, resource_size(res)); - if (!wdt_reg) - return -ENOMEM; + if (!wdt_reg) { + ret = -ENOMEM; + goto disable_clk; + } wdt_max_duration = WDT_MAX_CYCLE_COUNT / wdt_tclk; @@ -171,14 +178,16 @@ static int orion_wdt_probe(struct platform_device *pdev) watchdog_set_nowayout(&orion_wdt, nowayout); ret = watchdog_register_device(&orion_wdt); - if (ret) { - clk_disable_unprepare(clk); - return ret; - } + if (ret) + goto disable_clk; pr_info("Initial timeout %d sec%s\n", orion_wdt.timeout, nowayout ? ", nowayout" : ""); return 0; + +disable_clk: + clk_disable_unprepare(clk); + return ret; } static int orion_wdt_remove(struct platform_device *pdev) -- 1.8.1.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html