On Thu, Dec 07, 2017 at 06:55:40PM +0900, Yoshihiro Shimoda wrote:
> This patch adds USB3.0 PHY node for r8a7796.
>
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/renesas/r8a7796.dtsi | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
> index cc0cca7c..cee50e8 100644
> --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
> @@ -166,6 +166,19 @@
> clock-frequency = <0>;
> };
>
> + /* External USB clocks - can be overridden by the board */
> + usb3s0_clk: usb3s0 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <0>;
> + };
> +
> + usb_extal_clk: usb_extal {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <0>;
> + };
> +
> soc {
> compatible = "simple-bus";
> interrupt-parent = <&gic>;
> @@ -1419,6 +1432,19 @@
> status = "disabled";
> };
>
> + usb3_phy0: usb-phy@e65ee000 {
> + compatible = "renesas,r8a7796-usb3-phy",
> + "renesas,rcar-gen3-usb3-phy";
> + reg = <0 0xe65ee000 0 0x90>;
> + clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
> + <&usb_extal_clk>;
> + clock-names = "usb3-if", "usb3s_clk", "usb_extal";
> + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
> + resets = <&cpg 328>;
> + #phy-cells = <0>;
> + status = "disabled";
> + };
> +
> xhci0: usb@ee000000 {
> compatible = "renesas,xhci-r8a7796",
> "renesas,rcar-gen3-xhci";
Hi Shimoda-san,
I have applied this patch with a minor update.
* I shifted the _clk nodes to the bottom of the file to
preserve alphabetical order of the sub-nodes of the root node.
This ordering is new and probably was not the case when you submitted
the patch.
What I have applied is as follows:
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
Subject: [PATCH] arm64: dts: renesas: r8a7796: add usb3_phy node
This patch adds USB3.0 PHY node for r8a7796.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index a339047acdc7..c5192d513d7d 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -1403,6 +1403,19 @@
status = "disabled";
};
+ usb3_phy0: usb-phy@e65ee000 {
+ compatible = "renesas,r8a7796-usb3-phy",
+ "renesas,rcar-gen3-usb3-phy";
+ reg = <0 0xe65ee000 0 0x90>;
+ clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
+ <&usb_extal_clk>;
+ clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 328>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
xhci0: usb@ee000000 {
compatible = "renesas,xhci-r8a7796",
"renesas,rcar-gen3-xhci";
@@ -2021,4 +2034,17 @@
};
};
};
+
+ /* External USB clocks - can be overridden by the board */
+ usb3s0_clk: usb3s0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ usb_extal_clk: usb_extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
};
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
