On 13 December 2017 at 02:07, Andrew Lunn <andrew@xxxxxxx> wrote:
> On Tue, Dec 12, 2017 at 10:45:21PM +0530, jassisinghbrar@xxxxxxxxx wrote:
>> From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
>>
>> This patch adds documentation for Device-Tree bindings for the
>> Socionext NetSec Controller driver.
>>
>> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
>> Signed-off-by: Jassi Brar <jaswinder.singh@xxxxxxxxxx>
>> ---
>> .../devicetree/bindings/net/socionext-netsec.txt | 43 ++++++++++++++++++++++
>> 1 file changed, 43 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/net/socionext-netsec.txt
>>
>> diff --git a/Documentation/devicetree/bindings/net/socionext-netsec.txt b/Documentation/devicetree/bindings/net/socionext-netsec.txt
>> new file mode 100644
>> index 0000000..4695969
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/net/socionext-netsec.txt
>> @@ -0,0 +1,45 @@
>> +* Socionext NetSec Ethernet Controller IP
>> +
>> +Required properties:
>> +- compatible: Should be "socionext,synquacer-netsec"
>> +- reg: Address and length of the control register area, followed by the
>> + address and length of the EEPROM holding the MAC address and
>> + microengine firmware
>> +- interrupts: Should contain ethernet controller interrupt
>> +- clocks: phandle to the PHY reference clock, and any other clocks to be
>> + switched by runtime_pm
>> +- clock-names: Required only if more than a single clock is listed in 'clocks'.
>> + The PHY reference clock must be named 'phy_refclk'
>> +- phy-mode: See ethernet.txt file in the same directory
>> +- phy-handle: phandle to select child phy
>> +
>> +Optional properties: (See ethernet.txt file in the same directory)
>> +- dma-coherent: Boolean property, must only be present if memory
>> + accesses performed by the device are cache coherent
>> +- local-mac-address
>> +- mac-address
>> +- max-speed
>> +- max-frame-size
>> +
>> +Required properties for the child phy:
>> +- reg: phy address
>
> Hi Jassi
>
> Just reference phy.txt
>
>> +
>> +Example:
>> + eth0: netsec@522D0000 {
>> + compatible = "socionext,synquacer-netsec";
>> + reg = <0 0x522D0000 0x0 0x10000>, <0 0x10000000 0x0 0x10000>;
>> + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&clk_netsec>;
>> + phy-mode = "rgmii";
>> + max-speed = <1000>;
>> + max-frame-size = <9000>;
>> + phy-handle = <ðphy0>;
>> +
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>
> Please add an mdio node here, and list all the phys and possibly
> Ethernet switches as children of it.
>
OK. Though in order to avoid breaking dtbs in the wild already, the
driver falls back on using the parent node if no mdio subnode is
found.
Thank you.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
