On Tue, Dec 19, 2017 at 1:49 PM, Stefan Riedmueller
<s.riedmueller@xxxxxxxxx> wrote:
> + reg_pcie: regulator-pcie {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pcie_reg>;
> + compatible = "regulator-fixed";
> + regulator-name = "mPCIe_1V5";
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1500000>;
> + gpio = <&gpio3 0 GPIO_ACTIVE_HIGH>;
> + regulator-always-on;
Instead of using 'regulator-always-on' here, you could use:
vpcie-supply = <®_pcie>;
under the &pcie node
> + panel {
> + compatible = "auo,g104sn02";
I could not find this compatible in linux-next.
> + i2c_rtc: rtc@68 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rtc_int>;
> + compatible = "mc,rv4162";
I could not find this compatible in linux-next.
> +&pcie {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pcie>;
> + reset-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
The imx driver ignores the polarity and it is active high only when
'reset-gpio-active-high' property is present.
The correct here would be: reset-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>;
> +&uart3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart3>;
> + fsl,uart-has-rtscts;
uart-has-rtscts, please.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
