2017-12-18 19:28 GMT+01:00 Sven Van Asbroeck <svenv@xxxxxxxx>:
> From: Sven Van Asbroeck <svendev@xxxxxxxx>
>
> Fundamental properties such as capacity and page size differ
> among at24-type chips. But these chips do not have an id register,
> so this can't be discovered at runtime.
>
> Traditionally, at24-type eeprom properties were determined in two ways:
> - by passing a 'struct at24_platform_data' via platform_data, or
> - by naming the chip type in the devicetree, which passes a
> 'magic number' to probe(), which is then converted to
> a 'struct at24_platform_data'.
>
> Recently a bug was discovered because the magic number rounds down
> all chip sizes to the lowest power of two. This was addressed by
> a work-around, with the wish that magic numbers should over time
> be converted to structs.
> commit 5478e478eee3 ("eeprom: at24: correctly set the size for at24mac402")
>
> This patch replaces the magic numbers with 'struct at24_chip_data'.
>
> Signed-off-by: Sven Van Asbroeck <svendev@xxxxxxxx>
OK, this looks better. We still need to fix some formatting issues
though. Please find some remarks below.
> ---
> drivers/misc/eeprom/at24.c | 219 ++++++++++++++++++++-------------------------
> 1 file changed, 99 insertions(+), 120 deletions(-)
>
> diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
> index b44a3d2b..afa0f93 100644
> --- a/drivers/misc/eeprom/at24.c
> +++ b/drivers/misc/eeprom/at24.c
> @@ -105,16 +105,6 @@ struct at24_data {
> module_param_named(write_timeout, at24_write_timeout, uint, 0);
> MODULE_PARM_DESC(at24_write_timeout, "Time (in ms) to try writes (default 25)");
>
> -#define AT24_SIZE_BYTELEN 5
> -#define AT24_SIZE_FLAGS 8
> -
> -#define AT24_BITMASK(x) (BIT(x) - 1)
> -
> -/* create non-zero magic value for given eeprom parameters */
> -#define AT24_DEVICE_MAGIC(_len, _flags) \
> - ((1 << AT24_SIZE_FLAGS | (_flags)) \
> - << AT24_SIZE_BYTELEN | ilog2(_len))
> -
> /*
> * Both reads and writes fail if the previous write didn't complete yet. This
> * macro loops a few times waiting at least long enough for one entire page
> @@ -132,113 +122,108 @@ struct at24_data {
> op_time ? time_before(op_time, tout) : true; \
> usleep_range(1000, 1500), op_time = jiffies)
>
> +struct at24_chip_data {
> + /*
> + * these fields mirror their equivalents in
> + * struct at24_platform_data
> + */
> + u32 byte_len;
> + u8 flags;
> +};
> +
> +#define AT24_CHIP_DATA(_name, _len, _flags) \
> + static const struct at24_chip_data _name = { \
> + .byte_len = _len, .flags = _flags, \
> + }
> +
> +/* needs 8 addresses as A0-A2 are ignored */
> +AT24_CHIP_DATA(at24_data_24c00, 128 / 8, AT24_FLAG_TAKE8ADDR);
> +/* old variants can't be handled with this generic entry! */
> +AT24_CHIP_DATA(at24_data_24c01, 1024 / 8, 0);
> +AT24_CHIP_DATA(at24_data_24cs01, 16, AT24_FLAG_SERIAL |
> + AT24_FLAG_READONLY);
When breaking the lines like this, prefer to break after a comma and
having longer lines below - it's more readable that way. In this case
it would be:
AT24_CHIP_DATA(at24_data_24cs01,
AT24_FLAG_SERIAL | AT24_FLAG_READONLY);
The same applies elsewhere as long as it fits the line length of 80 chars.
> +AT24_CHIP_DATA(at24_data_24c02, 2048 / 8, 0);
> +AT24_CHIP_DATA(at24_data_24cs02, 16, AT24_FLAG_SERIAL |
> + AT24_FLAG_READONLY);
> +AT24_CHIP_DATA(at24_data_24mac402, 48 / 8, AT24_FLAG_MAC |
> + AT24_FLAG_READONLY);
> +AT24_CHIP_DATA(at24_data_24mac602, 64 / 8, AT24_FLAG_MAC |
> + AT24_FLAG_READONLY);
> +/* spd is a 24c02 in memory DIMMs */
> +AT24_CHIP_DATA(at24_data_spd, 2048 / 8, AT24_FLAG_READONLY |
> + AT24_FLAG_IRUGO);
> +AT24_CHIP_DATA(at24_data_24c04, 4096 / 8, 0);
> +AT24_CHIP_DATA(at24_data_24cs04, 16, AT24_FLAG_SERIAL |
> + AT24_FLAG_READONLY);
> +/* 24rf08 quirk is handled at i2c-core */
> +AT24_CHIP_DATA(at24_data_24c08, 8192 / 8, 0);
> +AT24_CHIP_DATA(at24_data_24cs08, 16, AT24_FLAG_SERIAL |
> + AT24_FLAG_READONLY);
> +AT24_CHIP_DATA(at24_data_24c16, 16384 / 8, 0);
> +AT24_CHIP_DATA(at24_data_24cs16, 16, AT24_FLAG_SERIAL |
> + AT24_FLAG_READONLY);
> +AT24_CHIP_DATA(at24_data_24c32, 32768 / 8, AT24_FLAG_ADDR16);
> +AT24_CHIP_DATA(at24_data_24cs32, 16, AT24_FLAG_ADDR16 |
> + AT24_FLAG_SERIAL | AT24_FLAG_READONLY);
> +AT24_CHIP_DATA(at24_data_24c64, 65536 / 8, AT24_FLAG_ADDR16);
> +AT24_CHIP_DATA(at24_data_24cs64, 16, AT24_FLAG_ADDR16 |
> + AT24_FLAG_SERIAL | AT24_FLAG_READONLY);
> +AT24_CHIP_DATA(at24_data_24c128, 131072 / 8, AT24_FLAG_ADDR16);
> +AT24_CHIP_DATA(at24_data_24c256, 262144 / 8, AT24_FLAG_ADDR16);
> +AT24_CHIP_DATA(at24_data_24c512, 524288 / 8, AT24_FLAG_ADDR16);
> +AT24_CHIP_DATA(at24_data_24c1024, 1048576 / 8, AT24_FLAG_ADDR16);
> +/* identical to 24c08 ? */
> +AT24_CHIP_DATA(at24_data_INT3499, 8192 / 8, 0);
> +
> static const struct i2c_device_id at24_ids[] = {
> - /* needs 8 addresses as A0-A2 are ignored */
> - { "24c00", AT24_DEVICE_MAGIC(128 / 8, AT24_FLAG_TAKE8ADDR) },
> - /* old variants can't be handled with this generic entry! */
> - { "24c01", AT24_DEVICE_MAGIC(1024 / 8, 0) },
> - { "24cs01", AT24_DEVICE_MAGIC(16,
> - AT24_FLAG_SERIAL | AT24_FLAG_READONLY) },
> - { "24c02", AT24_DEVICE_MAGIC(2048 / 8, 0) },
> - { "24cs02", AT24_DEVICE_MAGIC(16,
> - AT24_FLAG_SERIAL | AT24_FLAG_READONLY) },
> - { "24mac402", AT24_DEVICE_MAGIC(48 / 8,
> - AT24_FLAG_MAC | AT24_FLAG_READONLY) },
> - { "24mac602", AT24_DEVICE_MAGIC(64 / 8,
> - AT24_FLAG_MAC | AT24_FLAG_READONLY) },
> - /* spd is a 24c02 in memory DIMMs */
> - { "spd", AT24_DEVICE_MAGIC(2048 / 8,
> - AT24_FLAG_READONLY | AT24_FLAG_IRUGO) },
> - { "24c04", AT24_DEVICE_MAGIC(4096 / 8, 0) },
> - { "24cs04", AT24_DEVICE_MAGIC(16,
> - AT24_FLAG_SERIAL | AT24_FLAG_READONLY) },
> - /* 24rf08 quirk is handled at i2c-core */
> - { "24c08", AT24_DEVICE_MAGIC(8192 / 8, 0) },
> - { "24cs08", AT24_DEVICE_MAGIC(16,
> - AT24_FLAG_SERIAL | AT24_FLAG_READONLY) },
> - { "24c16", AT24_DEVICE_MAGIC(16384 / 8, 0) },
> - { "24cs16", AT24_DEVICE_MAGIC(16,
> - AT24_FLAG_SERIAL | AT24_FLAG_READONLY) },
> - { "24c32", AT24_DEVICE_MAGIC(32768 / 8, AT24_FLAG_ADDR16) },
> - { "24cs32", AT24_DEVICE_MAGIC(16,
> - AT24_FLAG_ADDR16 |
> - AT24_FLAG_SERIAL |
> - AT24_FLAG_READONLY) },
> - { "24c64", AT24_DEVICE_MAGIC(65536 / 8, AT24_FLAG_ADDR16) },
> - { "24cs64", AT24_DEVICE_MAGIC(16,
> - AT24_FLAG_ADDR16 |
> - AT24_FLAG_SERIAL |
> - AT24_FLAG_READONLY) },
> - { "24c128", AT24_DEVICE_MAGIC(131072 / 8, AT24_FLAG_ADDR16) },
> - { "24c256", AT24_DEVICE_MAGIC(262144 / 8, AT24_FLAG_ADDR16) },
> - { "24c512", AT24_DEVICE_MAGIC(524288 / 8, AT24_FLAG_ADDR16) },
> - { "24c1024", AT24_DEVICE_MAGIC(1048576 / 8, AT24_FLAG_ADDR16) },
> + { "24c00", (kernel_ulong_t)&at24_data_24c00 },
Please separate the two arguments with tabs and align them nicely in
the entire array.
> + { "24c01", (kernel_ulong_t)&at24_data_24c01 },
> + { "24cs01", (kernel_ulong_t)&at24_data_24cs01 },
> + { "24c02", (kernel_ulong_t)&at24_data_24c02 },
> + { "24cs02", (kernel_ulong_t)&at24_data_24cs02 },
> + { "24mac402", (kernel_ulong_t)&at24_data_24mac402 },
> + { "24mac602", (kernel_ulong_t)&at24_data_24mac602 },
> + { "spd", (kernel_ulong_t)&at24_data_spd },
> + { "24c04", (kernel_ulong_t)&at24_data_24c04 },
> + { "24cs04", (kernel_ulong_t)&at24_data_24cs04 },
> + { "24c08", (kernel_ulong_t)&at24_data_24c08 },
> + { "24cs08", (kernel_ulong_t)&at24_data_24cs08 },
> + { "24c16", (kernel_ulong_t)&at24_data_24c16 },
> + { "24cs16", (kernel_ulong_t)&at24_data_24cs16 },
> + { "24c32", (kernel_ulong_t)&at24_data_24c32 },
> + { "24cs32", (kernel_ulong_t)&at24_data_24cs32 },
> + { "24c64", (kernel_ulong_t)&at24_data_24c64 },
> + { "24cs64", (kernel_ulong_t)&at24_data_24cs64 },
> + { "24c128", (kernel_ulong_t)&at24_data_24c128 },
> + { "24c256", (kernel_ulong_t)&at24_data_24c256 },
> + { "24c512", (kernel_ulong_t)&at24_data_24c512 },
> + { "24c1024", (kernel_ulong_t)&at24_data_24c1024 },
> { "at24", 0 },
> { /* END OF LIST */ }
> };
> MODULE_DEVICE_TABLE(i2c, at24_ids);
>
> static const struct of_device_id at24_of_match[] = {
> - {
> - .compatible = "atmel,24c00",
> - .data = (void *)AT24_DEVICE_MAGIC(128 / 8, AT24_FLAG_TAKE8ADDR)
> - },
> - {
> - .compatible = "atmel,24c01",
> - .data = (void *)AT24_DEVICE_MAGIC(1024 / 8, 0)
> - },
> - {
> - .compatible = "atmel,24c02",
> - .data = (void *)AT24_DEVICE_MAGIC(2048 / 8, 0)
> - },
> - {
> - .compatible = "atmel,spd",
> - .data = (void *)AT24_DEVICE_MAGIC(2048 / 8,
> - AT24_FLAG_READONLY | AT24_FLAG_IRUGO)
> - },
> - {
> - .compatible = "atmel,24c04",
> - .data = (void *)AT24_DEVICE_MAGIC(4096 / 8, 0)
> - },
> - {
> - .compatible = "atmel,24c08",
> - .data = (void *)AT24_DEVICE_MAGIC(8192 / 8, 0)
> - },
> - {
> - .compatible = "atmel,24c16",
> - .data = (void *)AT24_DEVICE_MAGIC(16384 / 8, 0)
> - },
> - {
> - .compatible = "atmel,24c32",
> - .data = (void *)AT24_DEVICE_MAGIC(32768 / 8, AT24_FLAG_ADDR16)
> - },
> - {
> - .compatible = "atmel,24c64",
> - .data = (void *)AT24_DEVICE_MAGIC(65536 / 8, AT24_FLAG_ADDR16)
> - },
> - {
> - .compatible = "atmel,24c128",
> - .data = (void *)AT24_DEVICE_MAGIC(131072 / 8, AT24_FLAG_ADDR16)
> - },
> - {
> - .compatible = "atmel,24c256",
> - .data = (void *)AT24_DEVICE_MAGIC(262144 / 8, AT24_FLAG_ADDR16)
> - },
> - {
> - .compatible = "atmel,24c512",
> - .data = (void *)AT24_DEVICE_MAGIC(524288 / 8, AT24_FLAG_ADDR16)
> - },
> - {
> - .compatible = "atmel,24c1024",
> - .data = (void *)AT24_DEVICE_MAGIC(1048576 / 8, AT24_FLAG_ADDR16)
> - },
> - { },
> + { .compatible = "atmel,24c00", .data = &at24_data_24c00 },
Add tabs here as well, seems like there's enough space in the line.
> + { .compatible = "atmel,24c01", .data = &at24_data_24c01 },
> + { .compatible = "atmel,24c02", .data = &at24_data_24c02 },
> + { .compatible = "atmel,spd", .data = &at24_data_spd },
> + { .compatible = "atmel,24c04", .data = &at24_data_24c04 },
> + { .compatible = "atmel,24c08", .data = &at24_data_24c08 },
> + { .compatible = "atmel,24c16", .data = &at24_data_24c16 },
> + { .compatible = "atmel,24c32", .data = &at24_data_24c32 },
> + { .compatible = "atmel,24c64", .data = &at24_data_24c64 },
> + { .compatible = "atmel,24c128", .data = &at24_data_24c128 },
> + { .compatible = "atmel,24c256", .data = &at24_data_24c256 },
> + { .compatible = "atmel,24c512", .data = &at24_data_24c512 },
> + { .compatible = "atmel,24c1024", .data = &at24_data_24c1024 },
> + { /* END OF LIST */ },
> };
> MODULE_DEVICE_TABLE(of, at24_of_match);
>
> static const struct acpi_device_id at24_acpi_ids[] = {
> - { "INT3499", AT24_DEVICE_MAGIC(8192 / 8, 0) },
> - { }
> + { "INT3499", (kernel_ulong_t)&at24_data_INT3499 },
Same spacing as in the i2c device list.
> + { /* END OF LIST */ }
> };
> MODULE_DEVICE_TABLE(acpi, at24_acpi_ids);
>
> @@ -516,8 +501,8 @@ static unsigned int at24_get_offset_adj(u8 flags, unsigned int byte_len)
>
> static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
> {
> - struct at24_platform_data chip;
> - kernel_ulong_t magic = 0;
> + struct at24_platform_data chip = { 0 };
> + const struct at24_chip_data *cd = NULL;
> bool writable;
> struct at24_data *at24;
> int err;
> @@ -535,28 +520,22 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
> */
> if (client->dev.of_node &&
> of_match_device(at24_of_match, &client->dev)) {
> - magic = (kernel_ulong_t)
> - of_device_get_match_data(&client->dev);
> + cd = of_device_get_match_data(&client->dev);
> } else if (id) {
> - magic = id->driver_data;
> + cd = (void *)id->driver_data;
> } else {
> const struct acpi_device_id *aid;
>
> aid = acpi_match_device(at24_acpi_ids, &client->dev);
> if (aid)
> - magic = aid->driver_data;
> + cd = (void *)aid->driver_data;
> }
> - if (!magic)
> + if (!cd)
> return -ENODEV;
>
> - chip.byte_len = BIT(magic & AT24_BITMASK(AT24_SIZE_BYTELEN));
> - magic >>= AT24_SIZE_BYTELEN;
> - chip.flags = magic & AT24_BITMASK(AT24_SIZE_FLAGS);
> -
> + chip.byte_len = cd->byte_len;
> + chip.flags = cd->flags;
> at24_get_pdata(&client->dev, &chip);
> -
> - chip.setup = NULL;
> - chip.context = NULL;
> }
>
> if (!is_power_of_2(chip.byte_len))
> --
> 1.9.1
>
Thanks,
Bartosz
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
