From: Enrico Scholz <enrico.scholz@xxxxxxxxxxxxxxxxx>
Add support for the PHYTEC phyBOARD-Mira with i.MX 6QuadPlus with NAND.
It is based on the phyBOARD-Mira with i.MX 6Quad/Dual and supports the
same interfaces.
Signed-off-by: Enrico Scholz <enrico.scholz@xxxxxxxxxxxxxxxxx>
Signed-off-by: Stefan Lengfeld <s.lengfeld@xxxxxxxxx>
Signed-off-by: Christian Hemp <c.hemp@xxxxxxxxx>
Signed-off-by: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts | 76 +++++++++++++++++++++++
2 files changed, 77 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 07d99a1..d42b522 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -479,6 +479,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-zii-rdu2.dtb \
imx6qp-nitrogen6_max.dtb \
imx6qp-nitrogen6_som2.dtb \
+ imx6qp-phytec-mira-rdk-nand.dtb \
imx6qp-sabreauto.dtb \
imx6qp-sabresd.dtb \
imx6qp-tx6qp-8037.dtb \
diff --git a/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts
new file mode 100644
index 0000000..397871c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 PHYTEC Messtechnik GmbH
+ * Author: Enrico Scholz <enrico.scholz@xxxxxxxxxxxxxxxxx>
+ */
+
+/dts-v1/;
+#include "imx6qp.dtsi"
+#include "imx6qdl-phytec-phycore-som.dtsi"
+#include "imx6qdl-phytec-mira.dtsi"
+
+/ {
+ model = "PHYTEC phyBOARD-Mira QuadPlus Carrier-Board with NAND";
+ compatible = "phytec,imx6qp-pbac06-nand", "phytec,imx6qp-pbac06",
+ "phytec,imx6qdl-pcm058", "fsl,imx6qp";
+
+ aliases {
+ ipu1 = &ipu2;
+ };
+
+ chosen {
+ linux,stdout-path = &uart2;
+ };
+};
+
+&can1 {
+ status = "okay";
+};
+
+&fec {
+ status = "okay";
+};
+
+&flash {
+ status = "okay";
+};
+
+&gpmi {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c_rtc {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usbotg {
+ status = "okay";
+};
+
+&usdhc1 {
+ status = "okay";
+};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
