Documentation/devicetree/bindings/gpio/led.txt no longer exists, so update the
reference to the correct file where the "default-state" properly is explained.
Signed-off-by: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/leds/common.txt | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
index 2d88816..fa08a65 100644
--- a/Documentation/devicetree/bindings/leds/common.txt
+++ b/Documentation/devicetree/bindings/leds/common.txt
@@ -9,7 +9,8 @@ Optional properties for child nodes:
"backlight" - LED will act as a back-light, controlled by the framebuffer
system
"default-on" - LED will turn on (but for leds-gpio see "default-state"
- property in Documentation/devicetree/bindings/gpio/led.txt)
+ property in:
+ Documentation/devicetree/bindings/leds/leds-gpio.txt)
"heartbeat" - LED "double" flashes at a load average based rate
"ide-disk" - LED indicates disk activity
"timer" - LED flashes at a fixed, configurable rate
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
