On Mon, Dec 18, 2017 at 12:51 PM, <linux-kernel-dev@xxxxxxxxxxxx> wrote: > From: Patrick Bruenn <p.bruenn@xxxxxxxxxxxx> > > Neither rtc-imxdi, rtc-mxc nor rtc-snvs are compatible with i.MX53. > > This is driver enables support for the low power domain SRTC features: > - 32-bit MSB of non-rollover time counter > - 32-bit alarm register > > Select the new config option RTC_DRV_MXC_V2 to build this driver > > Based on: > http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/tree/drivers/rtc/rtc-mxc_v2.c?h=imx_2.6.35_11.09.01 > > Signed-off-by: Patrick Bruenn <p.bruenn@xxxxxxxxxxxx> > > --- > > v4: > - rename "srtc" node into generic "rtc" keep the label as "srtc" to avoid > duplication with imx53-m53.dtsi > - fix Signed-off-by: in bindings-patch > > v3: > - introduce new config option with the same patch, which adds the driver > - call rtc_update_irq() only if necessary > - merge mxc_rtc_write_alarm_locked() with mxc_rtc_set_alarm() > - only use clk_enable/disable (without "prepare") during operation > - rebase on v4.15-rc3 > - consistently use rtc_tm_to_time64() and time64_t > - refactor mxc_rtc_read_time(): don't lock for readl() only; > don't rtc_valid_tm(); use time64_t > - check returncode of mxc_rtc_wait_for_flag() > - restructure mxc_rtc_sync_lp_locked() to replace pr_err() with > dev_err_once(); remove explicit 'inline' > - don't touch imx_v4_v5_defconfig, instead add to imx_v6_v7_defconfig > > v2: > - have seperate patches for dt-binding, CONFIG option, imx53.dtsi and driver > - add SPDX-License-Identifier and cleanup copyright notice > - replace __raw_readl/writel() with readl/writel() > - fix PM_SLEEP callbacks > - add CONFIG_RTC_DRV_MXC_V2 to build rtc-mxc_v2.c > - remove misleading or obvious comments and fix style of the remaining > - avoid endless loop while waiting for hw > - implement consistent locking; make spinlock a member of dev struct > - enable clk only for register accesses > - remove all udelay() calls since they are obsolete or redundant > (we are already waiting for register flags to change) > - init platform_data before registering irq callback > - let set_time() fail, when 32 bit rtc counter exceeded > - make names more consistent > - cleanup and reorder includes > - cleanup and remove unused defines > > Cc: Alessandro Zummo <a.zummo@xxxxxxxxxxxx> > Cc: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx> > Cc: Rob Herring <robh+dt@xxxxxxxxxx> > Cc: Mark Rutland <mark.rutland@xxxxxxx> (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS) > Cc: linux-rtc@xxxxxxxxxxxxxxx (open list:REAL TIME CLOCK (RTC) SUBSYSTEM) > Cc: devicetree@xxxxxxxxxxxxxxx (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS) > Cc: linux-kernel@xxxxxxxxxxxxxxx (open list) > Cc: Fabio Estevam <fabio.estevam@xxxxxxx> > Cc: Juergen Borleis <jbe@xxxxxxxxxxxxxx> > Cc: Noel Vellemans <Noel.Vellemans@xxxxxxxxxxxxx> > Cc: Shawn Guo <shawnguo@xxxxxxxxxx> > Cc: Sascha Hauer <kernel@xxxxxxxxxxxxxx> (maintainer:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE) > Cc: Russell King <linux@xxxxxxxxxxxxxxx> (maintainer:ARM PORT) > Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx (moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE) > > Cc: Philippe Ombredanne <pombredanne@xxxxxxxx> > Cc: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx> > --- > > Patrick Bruenn (4): > dt-bindings: rtc: add bindings for i.MX53 SRTC > ARM: dts: imx53: add srtc node > rtc: add mxc driver for i.MX53 SRTC > ARM: imx_v6_v7_defconfig: enable RTC_DRV_MXC_V2 > > .../devicetree/bindings/rtc/rtc-mxc_v2.txt | 17 + > arch/arm/boot/dts/imx53.dtsi | 7 + > arch/arm/configs/imx_v6_v7_defconfig | 1 + > drivers/rtc/Kconfig | 10 + > drivers/rtc/Makefile | 1 + > drivers/rtc/rtc-mxc_v2.c | 422 +++++++++++++++++++++ > 6 files changed, 458 insertions(+) > create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mxc_v2.txt > create mode 100644 drivers/rtc/rtc-mxc_v2.c > > -- > 2.11.0 For the use of SPDX license tags in this patch set: Acked-by: Philippe Ombredanne <pombredanne@xxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html