Hi Heiko
Thanks :)
On 2017Äê12ÔÂ17ÈÕ 04:11, Heiko Stuebner wrote:
Hi Chris,
Am Mittwoch, 8. November 2017, 17:50:41 CET schrieb Chris Zhong:
The ethernet phy of rk3066a-rayeager has a reset pin, it controlled by
GPIO1_D6, this pin should be pull down then pull up to reset the phy.
Add a reset-gpios property in phy0, make the phy can be reset when emac
power on.
Signed-off-by: Chris Zhong <zyw@xxxxxxxxxxxxxx>
---
Changes in v2:
use a generic property for reset, and this patch follow these 2 pathes
from Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
http://patchwork.ozlabs.org/patch/828499/
http://patchwork.ozlabs.org/patch/828505/
looks like the phylib-patches were accepted some days ago,
so I've now also applied this patch for 4.16, after fixing the subject
by adding the "rockchip:" to "ARM: dts: rockchip": :-)
Heiko
--
Chris Zhong
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
