On Wed, Dec 6, 2017 at 1:29 PM, Stefan Agner <stefan@xxxxxxxx> wrote: > The Colibri default which enables USB Host power is not necessarily > tied to the OTG2 controller, some carrier board use the pin to > control USB power for both controllers. Hence name the pinctrl > group more generic. > > Also move the regulator to the generic eval-v3 device tree since > the regulator is always on the carrier board. In the Colibri iMX7S > case the regulator is just not used. This allows to reuse the > regulator in a upcoming SKU Colibri iMX7D 1GB with eMMC. > > Signed-off-by: Stefan Agner <stefan@xxxxxxxx> Reviewed-by: Fabio Estevam <fabio.estevam@xxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
