Jerome Brunet <jbrunet@xxxxxxxxxxxx> writes: > On Mon, 2017-12-11 at 22:13 +0800, Yixun Lan wrote: >> Qiufang Dai (3): >> clk: meson-axg: add clocks dt-bindings required header >> clk: meson-axg: add clock controller drivers >> arm64: dts: meson-axg: add clock DT info for Meson AXG SoC >> >> Yixun Lan (3): >> clk: meson: make the spinlock naming more specific >> dt-bindings: clock: add compatible variant for the Meson-AXG >> arm64: dts: meson-axg: switch uart_ao clock to CLK81 >> >> .../bindings/clock/amlogic,gxbb-clkc.txt | 7 +- >> arch/arm64/Kconfig.platforms | 1 + >> arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 2 + >> arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 19 +- >> drivers/clk/meson/Kconfig | 8 + >> drivers/clk/meson/Makefile | 1 + >> drivers/clk/meson/axg.c | 936 +++++++++++++++++++++ >> drivers/clk/meson/axg.h | 126 +++ >> drivers/clk/meson/clkc.h | 2 +- >> drivers/clk/meson/gxbb.c | 112 +-- >> drivers/clk/meson/meson8b.c | 24 +- >> include/dt-bindings/clock/axg-clkc.h | 71 ++ >> 12 files changed, 1234 insertions(+), 75 deletions(-) >> create mode 100644 drivers/clk/meson/axg.c >> create mode 100644 drivers/clk/meson/axg.h >> create mode 100644 include/dt-bindings/clock/axg-clkc.h > > Kevin, > > I took the first 4 patches through clk-meson. I left the last 2 for you. > > I have applied the DT bindings update separately. > Let me know if you have dependency on these new bindings and need a tag. Yes, I will need a tag on the headers since both the "switch uart_ao" patch and a subsequent patch to add DT for SPICC are using new clock IDs. Thanks, Kevin -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html