On 15/12/2017 15:17, Yixun Lan wrote: > Switch the uart_ao pclk to CLK81 since the clock driver is ready. > > Signed-off-by: Yixun Lan <yixun.lan@xxxxxxxxxxx> > > --- > This is a fixup for the previous version > > Changes in v8 since [1] > - move clock DT info into soc.dtsi > > [1] > http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005741.html > --- > arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi > index 01beb211f442..d1f8043be426 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi > @@ -7,6 +7,7 @@ > #include <dt-bindings/gpio/gpio.h> > #include <dt-bindings/interrupt-controller/irq.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/clock/axg-clkc.h> > > / { > compatible = "amlogic,meson-axg"; > @@ -200,7 +201,7 @@ > compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; > reg = <0x0 0x3000 0x0 0x18>; > interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; > - clocks = <&xtal>, <&xtal>, <&xtal>; > + clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; > clock-names = "xtal", "pclk", "baud"; > status = "disabled"; > }; > @@ -209,7 +210,7 @@ > compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; > reg = <0x0 0x4000 0x0 0x18>; > interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; > - clocks = <&xtal>, <&xtal>, <&xtal>; > + clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; > clock-names = "xtal", "pclk", "baud"; > status = "disabled"; > }; > Reviewed-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
