Hi Sakari, Do you have some comments on this version? Best Regards, Wenyou Yang > -----Original Message----- > From: linux-media-owner@xxxxxxxxxxxxxxx [mailto:linux-media- > owner@xxxxxxxxxxxxxxx] On Behalf Of Wenyou Yang > Sent: 2017年12月11日 9:32 > To: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>; Rob Herring > <robh+dt@xxxxxxxxxx>; Mark Rutland <mark.rutland@xxxxxxx> > Cc: linux-kernel@xxxxxxxxxxxxxxx; Nicolas Ferre - M43238 > <Nicolas.Ferre@xxxxxxxxxxxxx>; devicetree@xxxxxxxxxxxxxxx; Sakari Ailus > <sakari.ailus@xxxxxx>; Jonathan Corbet <corbet@xxxxxxx>; Hans Verkuil > <hverkuil@xxxxxxxxx>; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; Linux Media Mailing List > <linux-media@xxxxxxxxxxxxxxx>; Wenyou Yang - A41535 > <Wenyou.Yang@xxxxxxxxxxxxx> > Subject: [PATCH v9 0/2] media: ov7740: Add a V4L2 sensor-level driver > > Add a Video4Linux2 sensor-level driver for the OmniVision OV7740 VGA camera > image sensor. > > Changes in v9: > - Use the new SPDX ids. > > Changes in v8: > - As the registers are written at stream start, remove the written > code from the set fmt function. > > Changes in v7: > - Add Acked-by tag. > - Fix the wrong handle of default register configuration. > - Add the missed assignment of ov7740->frmsize. > > Changes in v6: > - Remove unnecessary #include <linux/init>. > - Remove unnecessary comments and extra newline. > - Add const for some structures. > - Add the check of the return value from regmap_write(). > - Simplify the calling of __v4l2_ctrl_handler_setup(). > - Add the default format initialization function. > - Integrate the set_power() and enable/disable the clock into > one function. > > Changes in v5: > - Squash the driver and MAINTAINERS entry patches to one. > - Precede the driver patch with the bindings patch. > > Changes in v4: > - Assign 'val' a initial value to avoid warning: 'val' may be > used uninitialized. > - Rename REG_REG15 to avoid warning: "REG_REG15" redefined. > > Changes in v3: > - Explicitly document the "remote-endpoint" property. > - Put the MAINTAINERS change to a separate patch. > > Changes in v2: > - Split off the bindings into a separate patch. > - Add a new entry to the MAINTAINERS file. > > Wenyou Yang (2): > media: ov7740: Document device tree bindings > media: i2c: Add the ov7740 image sensor driver > > .../devicetree/bindings/media/i2c/ov7740.txt | 47 + > MAINTAINERS | 8 + > drivers/media/i2c/Kconfig | 8 + > drivers/media/i2c/Makefile | 1 + > drivers/media/i2c/ov7740.c | 1216 ++++++++++++++++++++ > 5 files changed, 1280 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/i2c/ov7740.txt > create mode 100644 drivers/media/i2c/ov7740.c > > -- > 2.15.0 ?韬{.n?????%??檩??w?{.n????z谵{???塄}?财??j:+v?? ? ???2??璀??摺?囤??z夸z罐?+?????w棹f
