Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
Suggested-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Mathieu Malaterre <malat@xxxxxxxxxx>
---
arch/arm/boot/dts/ste-dbx5x0.dtsi | 2 +-
arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 130 ++++++++++++++---------------
arch/arm/boot/dts/ste-u300.dts | 50 +++++------
3 files changed, 91 insertions(+), 91 deletions(-)
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 2310a4e97768..cff985f9fb77 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -474,7 +474,7 @@
clocks = <&prcc_pclk 5 0>;
};
- dma: dma-controller@801C0000 {
+ dma: dma-controller@801c0000 {
compatible = "stericsson,db8500-dma40", "stericsson,dma40";
reg = <0x801C0000 0x1000 0x40010000 0x800>;
reg-names = "base", "lcpa";
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index 68aab50a73ab..2970719ed22c 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -195,7 +195,7 @@
* MXTAL "Main Chrystal" is a chrystal oscillator @19.2 MHz
* that is parent of TIMCLK, PLL1 and PLL2
*/
- mxtal: mxtal@19.2M {
+ mxtal: mxtal@19.2m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <19200000>;
@@ -207,7 +207,7 @@
* divided by 8. This clock is used by the timers and
* watchdog. See page 105 ff.
*/
- timclk: timclk@2.4M {
+ timclk: timclk@2.4m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <8>;
@@ -245,21 +245,21 @@
pll-id = <2>;
clocks = <&mxtal>;
};
- clk216: clk216@216M {
+ clk216: clk216@216m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <4>;
clock-mult = <1>;
clocks = <&pll2>;
};
- clk108: clk108@108M {
+ clk108: clk108@108m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <2>;
clock-mult = <1>;
clocks = <&clk216>;
};
- clk72: clk72@72M {
+ clk72: clk72@72m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
/* The data sheet does not say how this is derived */
@@ -267,7 +267,7 @@
clock-mult = <1>;
clocks = <&pll2>;
};
- clk48: clk48@48M {
+ clk48: clk48@48m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
/* The data sheet does not say how this is derived */
@@ -275,7 +275,7 @@
clock-mult = <1>;
clocks = <&pll2>;
};
- clk27: clk27@27M {
+ clk27: clk27@27m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <4>;
@@ -284,7 +284,7 @@
};
/* This apparently exists as well */
- ulpiclk: ulpiclk@60M {
+ ulpiclk: ulpiclk@60m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <60000000>;
@@ -295,193 +295,193 @@
* peripheral clocking, clock gates.
*/
- hclkdma0: hclkdma0@48M {
+ hclkdma0: hclkdma0@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <0>;
clocks = <&hclk>;
};
- hclksmc: hclksmc@48M {
+ hclksmc: hclksmc@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <1>;
clocks = <&hclk>;
};
- hclksdram: hclksdram@48M {
+ hclksdram: hclksdram@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <2>;
clocks = <&hclk>;
};
- hclkdma1: hclkdma1@48M {
+ hclkdma1: hclkdma1@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <3>;
clocks = <&hclk>;
};
- hclkclcd: hclkclcd@48M {
+ hclkclcd: hclkclcd@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <4>;
clocks = <&hclk>;
};
- pclkirda: pclkirda@48M {
+ pclkirda: pclkirda@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <5>;
clocks = <&pclk>;
};
- pclkssp: pclkssp@48M {
+ pclkssp: pclkssp@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <6>;
clocks = <&pclk>;
};
- pclkuart0: pclkuart0@48M {
+ pclkuart0: pclkuart0@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <7>;
clocks = <&pclk>;
};
- pclksdi: pclksdi@48M {
+ pclksdi: pclksdi@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <8>;
clocks = <&pclk>;
};
- pclki2c0: pclki2c0@48M {
+ pclki2c0: pclki2c0@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <9>;
clocks = <&pclk>;
};
- pclki2c1: pclki2c1@48M {
+ pclki2c1: pclki2c1@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <10>;
clocks = <&pclk>;
};
- pclkuart1: pclkuart1@48M {
+ pclkuart1: pclkuart1@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <11>;
clocks = <&pclk>;
};
- pclkmsp0: pclkmsp0@48M {
+ pclkmsp0: pclkmsp0@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <12>;
clocks = <&pclk>;
};
- hclkusb: hclkusb@48M {
+ hclkusb: hclkusb@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <13>;
clocks = <&hclk>;
};
- hclkdif: hclkdif@48M {
+ hclkdif: hclkdif@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <14>;
clocks = <&hclk>;
};
- hclksaa: hclksaa@48M {
+ hclksaa: hclksaa@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <15>;
clocks = <&hclk>;
};
- hclksva: hclksva@48M {
+ hclksva: hclksva@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <16>;
clocks = <&hclk>;
};
- pclkhsi: pclkhsi@48M {
+ pclkhsi: pclkhsi@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <17>;
clocks = <&pclk>;
};
- pclkxti: pclkxti@48M {
+ pclkxti: pclkxti@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <18>;
clocks = <&pclk>;
};
- pclkuart2: pclkuart2@48M {
+ pclkuart2: pclkuart2@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <19>;
clocks = <&pclk>;
};
- pclkmsp1: pclkmsp1@48M {
+ pclkmsp1: pclkmsp1@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <20>;
clocks = <&pclk>;
};
- pclkmsp2: pclkmsp2@48M {
+ pclkmsp2: pclkmsp2@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <21>;
clocks = <&pclk>;
};
- pclkowm: pclkowm@48M {
+ pclkowm: pclkowm@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <22>;
clocks = <&pclk>;
};
- hclkhpi: hclkhpi@48M {
+ hclkhpi: hclkhpi@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <23>;
clocks = <&hclk>;
};
- pclkske: pclkske@48M {
+ pclkske: pclkske@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <24>;
clocks = <&pclk>;
};
- pclkhsem: pclkhsem@48M {
+ pclkhsem: pclkhsem@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <25>;
clocks = <&pclk>;
};
- hclk3d: hclk3d@48M {
+ hclk3d: hclk3d@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <26>;
clocks = <&hclk>;
};
- hclkhash: hclkhash@48M {
+ hclkhash: hclkhash@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <27>;
clocks = <&hclk>;
};
- hclkcryp: hclkcryp@48M {
+ hclkcryp: hclkcryp@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <28>;
clocks = <&hclk>;
};
- pclkmshc: pclkmshc@48M {
+ pclkmshc: pclkmshc@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <29>;
clocks = <&pclk>;
};
- hclkusbm: hclkusbm@48M {
+ hclkusbm: hclkusbm@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <30>;
clocks = <&hclk>;
};
- hclkrng: hclkrng@48M {
+ hclkrng: hclkrng@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <31>;
@@ -495,153 +495,153 @@
clock-id = <36>;
clocks = <&clk72 &clk48>;
};
- irdaclk: irdaclk@48M {
+ irdaclk: irdaclk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <37>;
clocks = <&clk48>;
};
- sspiclk: sspiclk@48M {
+ sspiclk: sspiclk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <38>;
clocks = <&clk48>;
};
- uart0clk: uart0clk@48M {
+ uart0clk: uart0clk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <39>;
clocks = <&clk48>;
};
- sdiclk: sdiclk@48M {
+ sdiclk: sdiclk@48m {
/* Also called MCCLK in some documents */
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <40>;
clocks = <&clk48>;
};
- i2c0clk: i2c0clk@48M {
+ i2c0clk: i2c0clk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <41>;
clocks = <&clk48>;
};
- i2c1clk: i2c1clk@48M {
+ i2c1clk: i2c1clk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <42>;
clocks = <&clk48>;
};
- uart1clk: uart1clk@48M {
+ uart1clk: uart1clk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <43>;
clocks = <&clk48>;
};
- mspclk0: mspclk0@48M {
+ mspclk0: mspclk0@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <44>;
clocks = <&clk48>;
};
- usbclk: usbclk@48M {
+ usbclk: usbclk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <45>;
clocks = <&clk48>; /* 48 MHz not ULPI */
};
- difclk: difclk@72M {
+ difclk: difclk@72m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <46>;
clocks = <&clk72>;
};
- ipi2cclk: ipi2cclk@48M {
+ ipi2cclk: ipi2cclk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <47>;
clocks = <&clk48>; /* Guess */
};
- ipbmcclk: ipbmcclk@48M {
+ ipbmcclk: ipbmcclk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <48>;
clocks = <&clk48>; /* Guess */
};
- hsiclkrx: hsiclkrx@216M {
+ hsiclkrx: hsiclkrx@216m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <49>;
clocks = <&clk216>;
};
- hsiclktx: hsiclktx@108M {
+ hsiclktx: hsiclktx@108m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <50>;
clocks = <&clk108>;
};
- uart2clk: uart2clk@48M {
+ uart2clk: uart2clk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <51>;
clocks = <&clk48>;
};
- mspclk1: mspclk1@48M {
+ mspclk1: mspclk1@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <52>;
clocks = <&clk48>;
};
- mspclk2: mspclk2@48M {
+ mspclk2: mspclk2@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <53>;
clocks = <&clk48>;
};
- owmclk: owmclk@48M {
+ owmclk: owmclk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <54>;
clocks = <&clk48>; /* Guess */
};
- skeclk: skeclk@48M {
+ skeclk: skeclk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <56>;
clocks = <&clk48>; /* Guess */
};
- x3dclk: x3dclk@48M {
+ x3dclk: x3dclk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <58>;
clocks = <&clk48>; /* Guess */
};
- pclkmsp3: pclkmsp3@48M {
+ pclkmsp3: pclkmsp3@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <59>;
clocks = <&pclk>;
};
- mspclk3: mspclk3@48M {
+ mspclk3: mspclk3@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <60>;
clocks = <&clk48>;
};
- mshcclk: mshcclk@48M {
+ mshcclk: mshcclk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <61>;
clocks = <&clk48>; /* Guess */
};
- usbmclk: usbmclk@48M {
+ usbmclk: usbmclk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <62>;
/* Stated as "48 MHz not ULPI clock" */
clocks = <&clk48>;
};
- rngcclk: rngcclk@48M {
+ rngcclk: rngcclk@48m {
#clock-cells = <0>;
compatible = "st,nomadik-src-clock";
clock-id = <63>;
diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts
index 62ecb6a2fa39..08edee80f022 100644
--- a/arch/arm/boot/dts/ste-u300.dts
+++ b/arch/arm/boot/dts/ste-u300.dts
@@ -39,88 +39,88 @@
compatible = "fixed-clock";
clock-frequency = <32768>;
};
- pll13: pll13@13M {
+ pll13: pll13@13m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <13000000>;
};
/* Slow bridge clocks under PLL13 */
- slow_clk: slow_clk@13M {
+ slow_clk: slow_clk@13m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <0>; /* Slow */
clock-id = <0>;
clocks = <&pll13>;
};
- uart0_clk: uart0_clk@13M {
+ uart0_clk: uart0_clk@13m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <0>; /* Slow */
clock-id = <1>;
clocks = <&slow_clk>;
};
- gpio_clk: gpio_clk@13M {
+ gpio_clk: gpio_clk@13m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <0>; /* Slow */
clock-id = <4>;
clocks = <&slow_clk>;
};
- rtc_clk: rtc_clk@13M {
+ rtc_clk: rtc_clk@13m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <0>; /* Slow */
clock-id = <6>;
clocks = <&slow_clk>;
};
- apptimer_clk: app_tmr_clk@13M {
+ apptimer_clk: app_tmr_clk@13m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <0>; /* Slow */
clock-id = <7>;
clocks = <&slow_clk>;
};
- acc_tmr_clk@13M {
+ acc_tmr_clk@13m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <0>; /* Slow */
clock-id = <8>;
clocks = <&slow_clk>;
};
- pll208: pll208@208M {
+ pll208: pll208@208m {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <208000000>;
};
- app208: app_208_clk@208M {
+ app208: app_208_clk@208m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
clock-mult = <1>;
clocks = <&pll208>;
};
- cpu_clk@208M {
+ cpu_clk@208m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <2>; /* Rest */
clock-id = <3>;
clocks = <&app208>;
};
- app104: app_104_clk@104M {
+ app104: app_104_clk@104m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <2>;
clock-mult = <1>;
clocks = <&pll208>;
};
- semi_clk@104M {
+ semi_clk@104m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <2>; /* Rest */
clock-id = <9>;
clocks = <&app104>;
};
- app52: app_52_clk@52M {
+ app52: app_52_clk@52m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <4>;
@@ -128,49 +128,49 @@
clocks = <&pll208>;
};
/* AHB subsystem clocks */
- ahb_clk: ahb_subsys_clk@52M {
+ ahb_clk: ahb_subsys_clk@52m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <2>; /* Rest */
clock-id = <10>;
clocks = <&app52>;
};
- intcon_clk@52M {
+ intcon_clk@52m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <2>; /* Rest */
clock-id = <12>;
clocks = <&ahb_clk>;
};
- emif_clk@52M {
+ emif_clk@52m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <2>; /* Rest */
clock-id = <5>;
clocks = <&ahb_clk>;
};
- dmac_clk: dmac_clk@52M {
+ dmac_clk: dmac_clk@52m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <2>; /* Rest */
clock-id = <4>;
clocks = <&app52>;
};
- fsmc_clk: fsmc_clk@52M {
+ fsmc_clk: fsmc_clk@52m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <2>; /* Rest */
clock-id = <6>;
clocks = <&app52>;
};
- xgam_clk: xgam_clk@52M {
+ xgam_clk: xgam_clk@52m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <2>; /* Rest */
clock-id = <8>;
clocks = <&app52>;
};
- app26: app_26_clk@26M {
+ app26: app_26_clk@26m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <2>;
@@ -178,28 +178,28 @@
clocks = <&app52>;
};
/* Fast bridge clocks */
- fast_clk: fast_clk@26M {
+ fast_clk: fast_clk@26m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <1>; /* Fast */
clock-id = <0>;
clocks = <&app26>;
};
- i2c0_clk: i2c0_clk@26M {
+ i2c0_clk: i2c0_clk@26m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <1>; /* Fast */
clock-id = <1>;
clocks = <&fast_clk>;
};
- i2c1_clk: i2c1_clk@26M {
+ i2c1_clk: i2c1_clk@26m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <1>; /* Fast */
clock-id = <2>;
clocks = <&fast_clk>;
};
- mmc_pclk: mmc_p_clk@26M {
+ mmc_pclk: mmc_p_clk@26m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <1>; /* Fast */
@@ -211,7 +211,7 @@
compatible = "stericsson,u300-syscon-mclk";
clocks = <&mmc_pclk>;
};
- spi_clk: spi_p_clk@26M {
+ spi_clk: spi_p_clk@26m {
#clock-cells = <0>;
compatible = "stericsson,u300-syscon-clk";
clock-type = <1>; /* Fast */
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
