Hi Randy,
On Thu, 14 Dec 2017 11:54:16 -0800
Randy Dunlap <rdunlap@xxxxxxxxxxxxx> wrote:
> On 12/14/2017 07:16 AM, Boris Brezillon wrote:
> > Add a driver for Cadence I3C master IP.
> >
> > Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
> > ---
> > Changes in v2:
> > - Add basic IBI support. Note that the IP is not really reliable with
> > regards to IBI because you can't extract IBI payloads as soon as you
> > have more than one IBI waiting in the HW queue. This is something
> > that will hopefully be addressed in future revisions of this IP
> > - Add a simple xfer queueing mechanism to optimize message queuing.
> > - Fix a few bugs
> > - Add support for Hot Join
> > ---
> > drivers/i3c/master/Kconfig | 5 +
> > drivers/i3c/master/Makefile | 1 +
> > drivers/i3c/master/i3c-master-cdns.c | 1797 ++++++++++++++++++++++++++++++++++
> > 3 files changed, 1803 insertions(+)
> > create mode 100644 drivers/i3c/master/i3c-master-cdns.c
> >
> > diff --git a/drivers/i3c/master/Kconfig b/drivers/i3c/master/Kconfig
> > index e69de29bb2d1..56b9a18543b2 100644
> > --- a/drivers/i3c/master/Kconfig
> > +++ b/drivers/i3c/master/Kconfig
> > @@ -0,0 +1,5 @@
> > +config CDNS_I3C_MASTER
> > + tristate "Cadence I3C master driver"
> > + depends on I3C
> > + help
> > + Enable this driver if you want to support Cadence I3C master block.
> > diff --git a/drivers/i3c/master/Makefile b/drivers/i3c/master/Makefile
> > index e69de29bb2d1..4c4304aa9534 100644
> > --- a/drivers/i3c/master/Makefile
> > +++ b/drivers/i3c/master/Makefile
> > @@ -0,0 +1 @@
> > +obj-$(CONFIG_CDNS_I3C_MASTER) += i3c-master-cdns.o
> > diff --git a/drivers/i3c/master/i3c-master-cdns.c b/drivers/i3c/master/i3c-master-cdns.c
> > new file mode 100644
> > index 000000000000..3e3ef37c01c2
> > --- /dev/null
> > +++ b/drivers/i3c/master/i3c-master-cdns.c
> > @@ -0,0 +1,1797 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2017 Cadence Design Systems Inc.
> > + *
> > + * Author: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
> > + */
> > +
>
> Rule #1 from submit-checklist.rst:
> 1) If you use a facility then #include the file that defines/declares
> that facility. Don't depend on other header files pulling in ones
> that you use.
>
>
> #include <linux/bitops.h>
> for BIT(x) and hweight8() and clear_bit() and find_next_bit()
> and hweight32()
>
> > +#include <linux/clk.h>
>
> #include <linux/err.h>
> for IS_ERR(), PTR_ERR()
>
> #include <linux/errno.h>
> for error codes
>
> > +#include <linux/i3c/master.h>
> > +#include <linux/interrupt.h>
>
> #include <linux/io.h>
> for writel()
>
> > +#include <linux/iopoll.h>
>
> #include <linux/ioport.h>
> for IORESOURCE_MEM
>
> #include <linux/kernel.h>
> for DIV_ROUND_UP()
>
> #include <linux/list.h>
> for list() macros and INIT_LIST_HEAD()
>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/slab.h>
>
> #include <linux/spinlock.h>
>
> #include <linux/workqueue.h>
> for workqueue functions and INIT_WORK()
Will fix that.
>
> > +
> > +#define DEV_ID 0x0
> > +#define DEV_ID_I3C_MASTER 0x5034
>
> [snip]
>
>
>
> > +#define I3C_DDR_FIRST_DATA_WORD_PREAMBLE 0x2
> > +#define I3C_DDR_DATA_WORD_PREAMBLE 0x3
> > +
> > +#define I3C_DDR_PREAMBLE(p) ((p) << 18)
> > +
> > +static u32 prepare_ddr_word(u16 payload)
> > +{
> > + u32 ret;
> > + u16 pb;
> > +
> > + ret = (u32)payload << 2;
> > +
> > + /* Calculate parity. */
> > + pb = (payload >> 15) ^ (payload >> 13) ^ (payload >> 11) ^
> > + (payload >> 9) ^ (payload >> 7) ^ (payload >> 5) ^
> > + (payload >> 3) ^ (payload >> 1);
> > + ret |= (pb & 1) << 1;
> > + pb = (payload >> 14) ^ (payload >> 12) ^ (payload >> 10) ^
> > + (payload >> 8) ^ (payload >> 6) ^ (payload >> 4) ^
> > + (payload >> 2) ^ payload ^ 1;
> > + ret |= (pb & 1);
> > +
> > + return ret;
> > +}
> > +
> > +static u32 prepare_ddr_data_word(u16 data, bool first)
> > +{
> > + return prepare_ddr_word(data) | I3C_DDR_PREAMBLE(first ? 2 : 3);
>
> Just defined macros for 2 & 3 above. Use them instead of magic numbers?
Oops, that was my intention, just forgot to use the macros I had
defined.
>
> > +}
> > +
> > +#define I3C_DDR_READ_CMD BIT(15)
> > +
> > +static u32 prepare_ddr_cmd_word(u16 cmd)
> > +{
> > + return prepare_ddr_word(cmd) | I3C_DDR_PREAMBLE(1);
> > +}
> > +
> > +static u32 prepare_ddr_crc_word(u8 crc5)
> > +{
> > + return (((u32)crc5 & 0x1f) << 9) | (0xc << 14) |
> > + I3C_DDR_PREAMBLE(1);
> > +}
> > +
> > +static u8 update_crc5(u8 crc5, u16 word)
> > +{
> > + u8 crc0;
> > + int i;
> > +
> > + /*
> > + * crc0 = next_data_bit ^ crc[4]
> > + * 1 2 3 4
> > + * crc[4:0] = { crc[3:2], crc[1]^crc0, crc[0], crc0 }
> > + */
> > + for (i = 0; i < 16; ++i) {
> > + crc0 = ((word >> (15 - i)) ^ (crc5 >> 4)) & 0x1;
> > + crc5 = ((crc5 << 1) & (0x18 | 0x2)) |
> > + (((crc5 >> 1) ^ crc0) << 2) | crc0;
> > + }
> > +
> > + return crc5 & 0x1F;
> > +}
> > +
>
> [snip]
>
>
>
> > +static int cdns_i3c_master_do_daa_locked(struct cdns_i3c_master *master)
> > +{
> > + unsigned long i3c_lim_period, pres_step, i3c_scl_lim;
> > + struct i3c_device_info devinfo;
> > + struct i3c_device *i3cdev;
> > + u32 prescl1, ctrl, devs;
> > + int ret, slot, ncycles;
> > +
> > + ret = i3c_master_entdaa_locked(&master->base);
> > + if (ret)
> > + return ret;
> > +
> > + /* Now, add discovered devices to the bus. */
> > + i3c_scl_lim = master->i3c_scl_lim;
> > + devs = readl(master->regs + DEVS_CTRL);
> > + for (slot = find_next_bit(&master->free_dev_slots, BITS_PER_LONG, 1);
> > + slot < BITS_PER_LONG;
> > + slot = find_next_bit(&master->free_dev_slots,
> > + BITS_PER_LONG, slot + 1)) {
> > + struct cdns_i3c_i2c_dev_data *data;
> > + u32 rr, max_fscl = 0;
> > + u8 addr;
> > +
> > + if (!(devs & DEVS_CTRL_DEV_ACTIVE(slot)))
> > + continue;
> > +
> > + data = kzalloc(sizeof(*data), GFP_KERNEL);
> > + if (!data)
> > + return -ENOMEM;
> > +
> > + data->ibi = -1;
> > + data->id = slot;
> > + rr = readl(master->regs + DEV_ID_RR0(slot));
> > + addr = DEV_ID_RR0_GET_DEV_ADDR(rr);
> > + i3cdev = i3c_master_add_i3c_dev_locked(&master->base, addr);
> > + if (IS_ERR(i3cdev))
> > + return PTR_ERR(i3cdev);
> > +
> > + i3c_device_get_info(i3cdev, &devinfo);
> > + clear_bit(data->id, &master->free_dev_slots);
> > + i3c_device_set_master_data(i3cdev, data);
> > +
> > + max_fscl = max(I3C_CCC_MAX_SDR_FSCL(devinfo.max_read_ds),
> > + I3C_CCC_MAX_SDR_FSCL(devinfo.max_write_ds));
> > + switch (max_fscl) {
> > + case I3C_SDR_DR_FSCL_8MHZ:
> > + max_fscl = 8000000;
> > + break;
> > + case I3C_SDR_DR_FSCL_6MHZ:
> > + max_fscl = 6000000;
> > + break;
> > + case I3C_SDR_DR_FSCL_4MHZ:
> > + max_fscl = 4000000;
> > + break;
> > + case I3C_SDR_DR_FSCL_2MHZ:
> > + max_fscl = 2000000;
> > + break;
> > + case I3C_SDR_DR_FSCL_MAX:
> > + default:
> > + max_fscl = 0;
> > + break;
> > + }
> > +
> > + if (max_fscl && (max_fscl < i3c_scl_lim || !i3c_scl_lim))
> > + i3c_scl_lim = max_fscl;
> > + }
> > +
> > + i3c_master_defslvs_locked(&master->base);
> > +
> > + pres_step = 1000000000 / (master->base.bus->scl_rate.i3c * 4);
>
> Does that build OK on 32-bit target arch?
It's a 32 bit integer divided by another 32 bit integer, and yes, I
tested it on a 32 platform. This being said, I should use NSEC_PER_SEC
instead of 1000000000.
>
> > +
> > + /* No bus limitation to apply, bail out. */
> > + if (!i3c_scl_lim ||
> > + (master->i3c_scl_lim && master->i3c_scl_lim <= i3c_scl_lim))
> > + return 0;
> > +
> > + /* Configure PP_LOW to meet I3C slave limitations. */
> > + prescl1 = readl(master->regs + PRESCL_CTRL1) &
> > + ~PRESCL_CTRL1_PP_LOW_MASK;
> > + ctrl = readl(master->regs + CTRL) & ~CTRL_DEV_EN;
> > +
> > + i3c_lim_period = DIV_ROUND_UP(1000000000, i3c_scl_lim);
> > + ncycles = DIV_ROUND_UP(i3c_lim_period, pres_step) - 4;
> > + if (ncycles < 0)
> > + ncycles = 0;
> > + prescl1 |= PRESCL_CTRL1_PP_LOW(ncycles);
> > +
> > + /* Disable I3C master before updating PRESCL_CTRL1. */
> > + ret = cdns_i3c_master_disable(master);
> > + if (!ret) {
> > + writel(prescl1, master->regs + PRESCL_CTRL1);
> > + master->i3c_scl_lim = i3c_scl_lim;
> > + }
> > + cdns_i3c_master_enable(master);
> > +
> > + return ret;
> > +}
> > +
> > +static int cdns_i3c_master_bus_init(struct i3c_master_controller *m)
> > +{
> > + struct cdns_i3c_master *master = to_cdns_i3c_master(m);
> > + unsigned long pres_step, sysclk_rate, max_i2cfreq;
> > + u32 ctrl, prescl0, prescl1, pres, low;
> > + struct i3c_device_info info = { };
> > + struct i3c_ccc_events events;
> > + struct i2c_device *i2cdev;
> > + struct i3c_device *i3cdev;
> > + int ret, slot, ncycles;
> > + u8 last_addr = 0;
> > +
> > + switch (m->bus->mode) {
> > + case I3C_BUS_MODE_PURE:
> > + ctrl = CTRL_PURE_BUS_MODE;
> > + break;
> > +
> > + case I3C_BUS_MODE_MIXED_FAST:
> > + ctrl = CTRL_MIXED_FAST_BUS_MODE;
> > + break;
> > +
> > + case I3C_BUS_MODE_MIXED_SLOW:
> > + ctrl = CTRL_MIXED_SLOW_BUS_MODE;
> > + break;
> > +
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + sysclk_rate = clk_get_rate(master->sysclk);
> > + if (!sysclk_rate)
> > + return -EINVAL;
> > +
> > + pres = DIV_ROUND_UP(sysclk_rate, (m->bus->scl_rate.i3c * 4)) - 1;
> > + if (pres > PRESCL_CTRL0_MAX)
> > + return -ERANGE;
> > +
> > + m->bus->scl_rate.i3c = sysclk_rate / ((pres + 1) * 4);
> > +
> > + prescl0 = PRESCL_CTRL0_I3C(pres);
> > +
> > + low = ((I3C_BUS_TLOW_OD_MIN_NS * sysclk_rate) / (pres + 1)) - 2;
> > + prescl1 = PRESCL_CTRL1_OD_LOW(low);
> > +
> > + max_i2cfreq = m->bus->scl_rate.i2c;
> > +
> > + pres = (sysclk_rate / (max_i2cfreq * 5)) - 1;
> > + if (pres > PRESCL_CTRL0_MAX)
> > + return -ERANGE;
> > +
> > + m->bus->scl_rate.i2c = sysclk_rate / ((pres + 1) * 5);
> > +
> > + prescl0 |= PRESCL_CTRL0_I2C(pres);
> > +
> > + writel(DEVS_CTRL_DEV_CLR_ALL, master->regs + DEVS_CTRL);
> > +
> > + i3c_bus_for_each_i2cdev(m->bus, i2cdev) {
> > + ret = cdns_i3c_master_attach_i2c_dev(master, i2cdev);
> > + if (ret)
> > + goto err_detach_devs;
> > + }
> > +
> > + writel(prescl0, master->regs + PRESCL_CTRL0);
> > +
> > + /* Calculate OD and PP low. */
> > + pres_step = 1000000000 / (m->bus->scl_rate.i3c * 4);
> > + ncycles = DIV_ROUND_UP(I3C_BUS_TLOW_OD_MIN_NS, pres_step) - 2;
> > + if (ncycles < 0)
> > + ncycles = 0;
> > + prescl1 = PRESCL_CTRL1_OD_LOW(ncycles);
> > + writel(prescl1, master->regs + PRESCL_CTRL1);
> > +
> > + i3c_bus_for_each_i3cdev(m->bus, i3cdev) {
> > + ret = cdns_i3c_master_attach_i3c_dev(master, i3cdev);
> > + if (ret)
> > + goto err_detach_devs;
> > + }
> > +
> > + /* Get an address for the master. */
> > + ret = i3c_master_get_free_addr(m, 0);
> > + if (ret < 0)
> > + goto err_detach_devs;
> > +
> > + writel(prepare_rr0_dev_address(ret) | DEV_ID_RR0_IS_I3C,
> > + master->regs + DEV_ID_RR0(0));
> > +
> > + cdns_i3c_master_dev_rr_to_info(master, 0, &info);
> > + if (info.bcr & I3C_BCR_HDR_CAP)
> > + info.hdr_cap = I3C_CCC_HDR_MODE(I3C_HDR_DDR);
> > +
> > + ret = i3c_master_set_info(&master->base, &info);
> > + if (ret)
> > + goto err_detach_devs;
> > +
> > + /* Prepare RR slots before lauching DAA. */
>
> launching
>
> > + for (slot = find_next_bit(&master->free_dev_slots, BITS_PER_LONG, 1);
> > + slot < BITS_PER_LONG;
> > + slot = find_next_bit(&master->free_dev_slots,
> > + BITS_PER_LONG, slot + 1)) {
> > + ret = i3c_master_get_free_addr(m, last_addr + 1);
> > + if (ret < 0)
> > + goto err_disable_master;
> > +
> > + last_addr = ret;
> > + writel(prepare_rr0_dev_address(last_addr) | DEV_ID_RR0_IS_I3C,
> > + master->regs + DEV_ID_RR0(slot));
> > + writel(0, master->regs + DEV_ID_RR1(slot));
> > + writel(0, master->regs + DEV_ID_RR2(slot));
> > + }
> > +
> > + /*
> > + * Enable Hot-Join and when a Hot-Join request happen, disable all
>
> happens,
>
> > + * events coming from this device.
> > + *
> > + * We will issue ENTDAA afterwards from the threaded IRQ handler.
> > + */
> > + ctrl |= CTRL_HJ_ACK | CTRL_HJ_DISEC | CTRL_HALT_EN;
> > + writel(ctrl, master->regs + CTRL);
> > +
> > + cdns_i3c_master_enable(master);
> > +
> > + /*
> > + * Reset all dynamic addresses on the bus, because we don't know what
> > + * happened before this point (the bootloader may have assigned dynamic
> > + * addresses that we're not aware of).
> > + */
> > + ret = i3c_master_rstdaa_locked(m, I3C_BROADCAST_ADDR);
> > + if (ret)
> > + goto err_disable_master;
> > +
> > + /* Disable all slave events (interrupts) before starting DAA. */
> > + events.events = I3C_CCC_EVENT_SIR | I3C_CCC_EVENT_MR |
> > + I3C_CCC_EVENT_HJ;
> > + ret = i3c_master_disec_locked(m, I3C_BROADCAST_ADDR, &events);
> > + if (ret)
> > + goto err_disable_master;
> > +
> > + ret = cdns_i3c_master_do_daa_locked(master);
> > + if (ret < 0)
> > + goto err_disable_master;
> > +
> > + /* Unmask Hot-Join and Marstership request interrupts. */
>
> Is that Mastership ?
It is. I'll fix the other typos you pointed.
>
> > + events.events = I3C_CCC_EVENT_HJ | I3C_CCC_EVENT_MR;
> > + ret = i3c_master_enec_locked(m, I3C_BROADCAST_ADDR, &events);
> > + if (ret)
> > + pr_info("Failed to re-enable H-J");
>
> Not very good info...
What do you mean? Is it the H-J that bothers you (I can replace it by
'Hot-Join'), or is it something else?
Thanks for the review.
Boris
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
