Sven Eckelmann <sven.eckelmann@xxxxxxxxxxxx> wrote: > The bus + bmi-chip-id + bmi-board-id is not enough to identify the correct > board data file on QCA4019 based devices. Multiple different boards share > the same values. Only the original reference designs can currently be > identified and loaded from the board-2.bin. But these will not result in > the correct calibration data when combined with the pre-calibration data > from the device. > > An additional "variant" information has to be provided (via SMBIOS or DT) > to select the correct board data for a design which was modified by an ODM. > > Signed-off-by: Sven Eckelmann <sven.eckelmann@xxxxxxxxxxxx> > Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxxxx> 2 patches applied to ath-next branch of ath.git, thanks. 40fb0eab30ba dt: bindings: add new dt entry for ath10k calibration variant d06f26c5c8a4 ath10k: search DT for qcom,ath10k-calibration-variant -- https://patchwork.kernel.org/patch/10102249/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
