On 12/07/2017 07:43 AM, sean.wang@xxxxxxxxxxxx wrote:
> From: Sean Wang <sean.wang@xxxxxxxxxxxx>
>
> Fix that bananapi-r2 booting from SD-card would fail since incorrect
> polarity is applied to the previous setup with GPIO_ACTIVE_HIGH.
>
> Cc: stable@xxxxxxxxxxxxxxx
> Fixes: 0eed8d097612 ("arm: dts: mt7623: Add SD-card and EMMC to bananapi-r2")
> Signed-off-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
> Tested-by: Matthias Brugger <matthias.bgg@xxxxxxxxx>
> ---
> arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> index 688a863..7bf5aa2 100644
> --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> @@ -204,7 +204,7 @@
> bus-width = <4>;
> max-frequency = <50000000>;
> cap-sd-highspeed;
> - cd-gpios = <&pio 261 0>;
> + cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
> vmmc-supply = <&mt6323_vmch_reg>;
> vqmmc-supply = <&mt6323_vio18_reg>;
> };
>
2 and 3 pushed to v4.15-next/dts32
Thanks!
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
