Hi Miquel,
On jeu., déc. 14 2017, Miquel Raynal <miquel.raynal@xxxxxxxxxxxxxxxxxx> wrote:
> From: Baruch Siach <baruch@xxxxxxxxxx>
>
> The CP110 component is integrated in the Armada 8k and 7k lines of
> processors.
>
> Signed-off-by: Baruch Siach <baruch@xxxxxxxxxx>
> [<miquel.raynal@xxxxxxxxxxxxxxxxxx>: renamed the register pointers]
Actually you did more thant this see below
> Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxxxxxxxxx>
> ---
> drivers/thermal/armada_thermal.c | 30 ++++++++++++++++++++++++------
> 1 file changed, 24 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c
> index 279d01937bb8..f5c911524656 100644
> --- a/drivers/thermal/armada_thermal.c
> +++ b/drivers/thermal/armada_thermal.c
> @@ -37,7 +37,6 @@
> #define A375_UNIT_CONTROL_MASK 0x7
> #define A375_READOUT_INVERT BIT(15)
> #define A375_HW_RESETn BIT(8)
> -#define A380_HW_RESET BIT(8)
>
> /* Legacy bindings */
> #define LEGACY_CONTROL_MEM_LEN 0x4
> @@ -52,6 +51,10 @@
> #define CONTROL0_TSEN_RESET BIT(1)
> #define CONTROL0_TSEN_ENABLE BIT(2)
>
> +/* EXT_TSEN refers to the external temperature sensors, out of the AP */
> +#define CONTROL1_EXT_TSEN_SW_RESET BIT(7)
> +#define CONTROL1_EXT_TSEN_HW_RESETn BIT(8)
You added or rename these values
> +
> struct armada_thermal_data;
>
> /* Marvell EBU Thermal Sensor Dev Structure */
> @@ -153,11 +156,10 @@ static void armada380_init_sensor(struct platform_device *pdev,
> u32 reg = readl_relaxed(priv->control1);
>
> /* Reset hardware once */
> - if (!(reg & A380_HW_RESET)) {
> - reg |= A380_HW_RESET;
> - writel(reg, priv->control1);
> - msleep(10);
> - }
> + reg |= CONTROL1_EXT_TSEN_HW_RESETn;
> + reg &= ~CONTROL1_EXT_TSEN_SW_RESET;
> + writel(reg, priv->control1);
And here you modified the behavior of this function.
Did you checked that it is valid for Armada 38x?
Given the comment we had, I thought we should not do anything if
CONTROL1_EXT_TSEN_HW_RESETn was not set.
By the way, if the new sequence is valid, this comment should be removed
or at least updated.
Gregory
> + msleep(10);
> }
>
> static void armada_ap806_init_sensor(struct platform_device *pdev,
> @@ -280,6 +282,18 @@ static const struct armada_thermal_data armada_ap806_data = {
> .signed_sample = true,
> };
>
> +static const struct armada_thermal_data armada_cp110_data = {
> + .is_valid = armada_is_valid,
> + .init_sensor = armada380_init_sensor,
> + .is_valid_bit = BIT(10),
> + .temp_shift = 0,
> + .temp_mask = 0x3ff,
> + .coef_b = 1172499100UL,
> + .coef_m = 2000096UL,
> + .coef_div = 4201,
> + .inverted = true,
> +};
> +
> static const struct of_device_id armada_thermal_id_table[] = {
> {
> .compatible = "marvell,armadaxp-thermal",
> @@ -302,6 +316,10 @@ static const struct of_device_id armada_thermal_id_table[] = {
> .data = &armada_ap806_data,
> },
> {
> + .compatible = "marvell,armada-cp110-thermal",
> + .data = &armada_cp110_data,
> + },
> + {
> /* sentinel */
> },
> };
> --
> 2.11.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
