Update the lp8860 bindings to fix various issues found. Add address-cells and size-cells, rename enable-gpio to enable-gpios, update the node name to the device name and indent the node example. Signed-off-by: Dan Murphy <dmurphy@xxxxxx> --- v3 - Indicatd enable-gpios is active high, moved address and size cells to child node patch and updated parent DT node name - https://patchwork.kernel.org/patch/10093745/ v2 - New patch Documentation/devicetree/bindings/leds/leds-lp8860.txt | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt b/Documentation/devicetree/bindings/leds/leds-lp8860.txt index aad38dd94d4b..b9d09acbaa73 100644 --- a/Documentation/devicetree/bindings/leds/leds-lp8860.txt +++ b/Documentation/devicetree/bindings/leds/leds-lp8860.txt @@ -6,22 +6,22 @@ current sinks that can be controlled by a PWM input signal, a SPI/I2C master, or both. Required properties: - - compatible: + - compatible : "ti,lp8860" - - reg - I2C slave address - - label - Used for naming LEDs + - reg : I2C slave address + - label : Used for naming LEDs Optional properties: - - enable-gpio - gpio pin to enable/disable the device. - - supply - "vled" - LED supply + - enable-gpios : gpio pin to enable (active high)/disable the device. + - vled-supply : LED supply Example: -leds: leds@6 { +led-controller@2d { compatible = "ti,lp8860"; reg = <0x2d>; label = "display_cluster"; - enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; vled-supply = <&vbatt>; } -- 2.15.0.124.g7668cbc60 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
