Hi,
On 12/12/17 12:31, Ilia Lin wrote:
From: Taniya Das <tdas@xxxxxxxxxxxxxx>
From: Taniya Das <tdas@xxxxxxxxxxxxxx>
Alpha PLLs which do not support dynamic update feature
need to be explicitly disabled before a rate change.
The ones which do support dynamic update do so within a
single vco range, so add a min/max freq check for such
PLLs so they fall in the vco range.
Signed-off-by: Taniya Das <tdas@xxxxxxxxxxxxxx>
Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
Signed-off-by: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
---
drivers/clk/qcom/clk-alpha-pll.c | 71 +++++++++++++++++++++++++++++++++-------
drivers/clk/qcom/clk-alpha-pll.h | 5 +++
2 files changed, 65 insertions(+), 11 deletions(-)
diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 47a1da3..ecb9e7f 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -376,19 +376,46 @@ static unsigned long alpha_pll_calc_rate(u64 prate, u32 l, u32 a)
return alpha_pll_calc_rate(prate, l, a);
}
-static int clk_alpha_pll_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long prate)
+static int alpha_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long prate,
+ int (*enable)(struct clk_hw *hw),
+ void (*disable)(struct clk_hw *hw))
{
+ bool enabled;
Some remarks about this.
struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
const struct pll_vco *vco;
u32 l, off = pll->offset;
u64 a;
rate = alpha_pll_round_rate(rate, prate, &l, &a);
- vco = alpha_pll_find_vco(pll, rate);
- if (!vco) {
- pr_err("alpha pll not in a valid vco range\n");
- return -EINVAL;
+ enabled = clk_hw_is_enabled(hw);
This is not needed unless we go through the 'else' branch.
+
+ if (pll->flags & SUPPORTS_DYNAMIC_UPDATE) {
+ /*
+ * PLLs which support dynamic updates support one single
+ * vco range, between min_rate and max_rate supported
+ */
+ if (rate < pll->min_rate || rate > pll->max_rate) {
+ pr_err("alpha pll rate outside supported min/max range\n");
+ return -EINVAL;
+ }
+ } else {
+ /*
+ * All alpha PLLs which do not support dynamic update,
+ * should be disabled before a vco update.
+ */
+ if (enabled)
+ disable(hw);
+
+ vco = alpha_pll_find_vco(pll, rate);
+ if (!vco) {
+ pr_err("alpha pll not in a valid vco range\n");
+ return -EINVAL;
+ }
+
+ regmap_update_bits(pll->clkr.regmap, off + PLL_USER_CTL,
+ PLL_VCO_MASK << PLL_VCO_SHIFT,
+ vco->val << PLL_VCO_SHIFT);
}
regmap_write(pll->clkr.regmap, off + PLL_L_VAL, l);
@@ -401,16 +428,29 @@ static int clk_alpha_pll_set_rate(struct clk_hw *hw, unsigned long rate,
regmap_write(pll->clkr.regmap, off + PLL_ALPHA_VAL_U, a >> 32);
}
- regmap_update_bits(pll->clkr.regmap, off + PLL_USER_CTL,
- PLL_VCO_MASK << PLL_VCO_SHIFT,
- vco->val << PLL_VCO_SHIFT);
-
regmap_update_bits(pll->clkr.regmap, off + PLL_USER_CTL, PLL_ALPHA_EN,
PLL_ALPHA_EN);
+ if (!(pll->flags & SUPPORTS_DYNAMIC_UPDATE) && enabled)
+ enable(hw);
+
This condition is only "did we disable the clock and need to reenable it?".
To make it clearer, I'd suggest renaming 'enabled' to something like
'need_reenabling' and the code look like this:
static int alpha_pll_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long prate,
int (*enable)(struct clk_hw *hw),
void (*disable)(struct clk_hw *hw))
{
bool need_reenabling = false;
[...]
if(pll->flags & SUPPORTS_DYNAMIC_UPDATE) {
[...]
} else {
if (clk_hw_is_enabled(hw)) {
disable(hw);
need_reenabling = true;
}
[...]
}
[...]
if (need_reenabling)
enable(hw);
}
Cheers,
--
Julien Thierry
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
