Use XAUI rather than XGMII for DSA link ports, as this is the interface
mode that the switches actually use. XAUI is the 4 lane bus with clock
per direction, whereas XGMII is a 32 bit bus with clock.
Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>
---
This must be applied along with patch 1 to avoid breakage.
arch/arm/boot/dts/vf610-zii-dev-rev-c.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
index 1b102c7f7928..4a972fceb3b5 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
@@ -128,7 +128,7 @@
switch0port10: port@10 {
reg = <10>;
label = "dsa";
- phy-mode = "xgmii";
+ phy-mode = "xaui";
link = <&switch1port10>;
};
};
@@ -233,7 +233,7 @@
switch1port10: port@10 {
reg = <10>;
label = "dsa";
- phy-mode = "xgmii";
+ phy-mode = "xaui";
link = <&switch0port10>;
};
};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
