Hi
On 2017-12-11 23:48, Javier Martinez Canillas wrote:
Commit 1cb686c08d12 ("ARM: dts: exynos: Add status property to Exynos 542x
Mixer nodes") disabled the Mixer node by default in the DTSI and enabled
for each Exynos 542x DTS. But unfortunately it missed to enable it for the
Exynos5800 Peach Pi machine, since the 5800 is also an 542x SoC variant.
Signed-off-by: Javier Martinez Canillas <javierm@xxxxxxxxxx>
Acked-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
---
I believe this may cause the boot issues reported on Exynos5800 Peach Pi
from v4.15-rc3, the mentioned commit made to v4.15-rc1 but it seems that
didn't cause any harm until commit ("510353a63796 drm/bridge: analogix
dp: Fix runtime PM state in get_modes() callback") fixed the runtime PM
management in the DP driver.
Thanks for analyzing this. Lack of this change was probably responsible for
Exynos DRM initialization failure ("exynos-drm exynos-drm: failed to bind
14530000.hdmi (ops hdmi_component_ops): -1" message and probably further
error "unbalanced disables for lcd_vdd", which shows that failure path of
analogix dp and simple panel causes unbalanced regulator disable.
This patch should go to v4.15-rcX (fixes) if possible.
I can't test right now, but I'm posting anyways as a RFT in case others
that have access to a Peach Pi can test it.
Best regards,
Javier
arch/arm/boot/dts/exynos5800-peach-pi.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index b2b95ff205e8..0029ec27819c 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -664,6 +664,10 @@
status = "okay";
};
+&mixer {
+ status = "okay";
+};
+
/* eMMC flash */
&mmc_0 {
status = "okay";
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
