From: Patrick Bruenn <p.bruenn@xxxxxxxxxxxx> Neither rtc-imxdi, rtc-mxc nor rtc-snvs are compatible with i.MX53. This is driver enables support for the low power domain SRTC features: - 32-bit MSB of non-rollover time counter - 32-bit alarm register Select the new config option RTC_DRV_MXC_V2 to build this driver Based on: http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/tree/drivers/rtc/rtc-mxc_v2.c?h=imx_2.6.35_11.09.01 Signed-off-by: Patrick Bruenn <p.bruenn@xxxxxxxxxxxx> --- Open issue: - naming of the device tree node "rtc" vs. "srtc" v3: - introduce new config option with the same patch, which adds the driver - call rtc_update_irq() only if necessary - merge mxc_rtc_write_alarm_locked() with mxc_rtc_set_alarm() - only use clk_enable/disable (without "prepare") during operation - rebase on v4.15-rc3 - consistently use rtc_tm_to_time64() and time64_t - refactor mxc_rtc_read_time(): don't lock for readl() only; don't rtc_valid_tm(); use time64_t - check returncode of mxc_rtc_wait_for_flag() - restructure mxc_rtc_sync_lp_locked() to replace pr_err() with dev_err_once(); remove explicit 'inline' - don't touch imx_v4_v5_defconfig, instead add to imx_v6_v7_defconfig v2: - have seperate patches for dt-binding, CONFIG option, imx53.dtsi and driver - add SPDX-License-Identifier and cleanup copyright notice - replace __raw_readl/writel() with readl/writel() - fix PM_SLEEP callbacks - add CONFIG_RTC_DRV_MXC_V2 to build rtc-mxc_v2.c - remove misleading or obvious comments and fix style of the remaining - avoid endless loop while waiting for hw - implement consistent locking; make spinlock a member of dev struct - enable clk only for register accesses - remove all udelay() calls since they are obsolete or redundant (we are already waiting for register flags to change) - init platform_data before registering irq callback - let set_time() fail, when 32 bit rtc counter exceeded - make names more consistent - cleanup and reorder includes - cleanup and remove unused defines Cc: Alessandro Zummo <a.zummo@xxxxxxxxxxxx> Cc: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx> Cc: Rob Herring <robh+dt@xxxxxxxxxx> Cc: Mark Rutland <mark.rutland@xxxxxxx> (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS) Cc: linux-rtc@xxxxxxxxxxxxxxx (open list:REAL TIME CLOCK (RTC) SUBSYSTEM) Cc: devicetree@xxxxxxxxxxxxxxx (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS) Cc: linux-kernel@xxxxxxxxxxxxxxx (open list) Cc: Fabio Estevam <fabio.estevam@xxxxxxx> Cc: Juergen Borleis <jbe@xxxxxxxxxxxxxx> Cc: Noel Vellemans <Noel.Vellemans@xxxxxxxxxxxxx> Cc: Shawn Guo <shawnguo@xxxxxxxxxx> Cc: Sascha Hauer <kernel@xxxxxxxxxxxxxx> (maintainer:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE) Cc: Russell King <linux@xxxxxxxxxxxxxxx> (maintainer:ARM PORT) Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx (moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE) Cc: Philippe Ombredanne <pombredanne@xxxxxxxx> Cc: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx> --- drivers/rtc/Kconfig | 10 ++ drivers/rtc/Makefile | 1 + drivers/rtc/rtc-mxc_v2.c | 422 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 433 insertions(+) create mode 100644 drivers/rtc/rtc-mxc_v2.c diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index b59a31b079a5..440edebf5c71 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -1689,6 +1689,16 @@ config RTC_DRV_MXC This driver can also be built as a module, if so, the module will be called "rtc-mxc". +config RTC_DRV_MXC_V2 + tristate "Freescale MXC Real Time Clock for i.MX53" + depends on ARCH_MXC + help + If you say yes here you get support for the Freescale MXC + SRTC module in i.MX53 processor. + + This driver can also be built as a module, if so, the module + will be called "rtc-mxc_v2". + config RTC_DRV_SNVS tristate "Freescale SNVS RTC support" select REGMAP_MMIO diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index f2f50c11dc38..dcf60e61ae5c 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -106,6 +106,7 @@ obj-$(CONFIG_RTC_DRV_MT6397) += rtc-mt6397.o obj-$(CONFIG_RTC_DRV_MT7622) += rtc-mt7622.o obj-$(CONFIG_RTC_DRV_MV) += rtc-mv.o obj-$(CONFIG_RTC_DRV_MXC) += rtc-mxc.o +obj-$(CONFIG_RTC_DRV_MXC_V2) += rtc-mxc_v2.o obj-$(CONFIG_RTC_DRV_NUC900) += rtc-nuc900.o obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o obj-$(CONFIG_RTC_DRV_OPAL) += rtc-opal.o diff --git a/drivers/rtc/rtc-mxc_v2.c b/drivers/rtc/rtc-mxc_v2.c new file mode 100644 index 000000000000..b637095b0716 --- /dev/null +++ b/drivers/rtc/rtc-mxc_v2.c @@ -0,0 +1,422 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Real Time Clock (RTC) Driver for i.MX53 + * Copyright (c) 2004-2011 Freescale Semiconductor, Inc. + * Copyright (c) 2017 Beckhoff Automation GmbH & Co. KG + */ + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/rtc.h> + +#define SRTC_LPPDR_INIT 0x41736166 /* init for glitch detect */ + +#define SRTC_LPCR_EN_LP BIT(3) /* lp enable */ +#define SRTC_LPCR_WAE BIT(4) /* lp wakeup alarm enable */ +#define SRTC_LPCR_ALP BIT(7) /* lp alarm flag */ +#define SRTC_LPCR_NSA BIT(11) /* lp non secure access */ +#define SRTC_LPCR_NVE BIT(14) /* lp non valid state exit bit */ +#define SRTC_LPCR_IE BIT(15) /* lp init state exit bit */ + +#define SRTC_LPSR_ALP BIT(3) /* lp alarm flag */ +#define SRTC_LPSR_NVES BIT(14) /* lp non-valid state exit status */ +#define SRTC_LPSR_IES BIT(15) /* lp init state exit status */ + +#define SRTC_LPSCMR 0x00 /* LP Secure Counter MSB Reg */ +#define SRTC_LPSCLR 0x04 /* LP Secure Counter LSB Reg */ +#define SRTC_LPSAR 0x08 /* LP Secure Alarm Reg */ +#define SRTC_LPCR 0x10 /* LP Control Reg */ +#define SRTC_LPSR 0x14 /* LP Status Reg */ +#define SRTC_LPPDR 0x18 /* LP Power Supply Glitch Detector Reg */ + +/* max. number of retries to read registers, 120 was max during test */ +#define REG_READ_TIMEOUT 2000 + +struct mxc_rtc_data { + struct rtc_device *rtc; + void __iomem *ioaddr; + struct clk *clk; + spinlock_t lock; /* protects register access */ + int irq; +}; + +/* + * This function does write synchronization for writes to the lp srtc block. + * To take care of the asynchronous CKIL clock, all writes from the IP domain + * will be synchronized to the CKIL domain. + * The caller should hold the pdata->lock + */ +static void mxc_rtc_sync_lp_locked(struct device *dev, void __iomem *ioaddr) +{ + unsigned int i; + + /* Wait for 3 CKIL cycles */ + for (i = 0; i < 3; i++) { + const u32 count = readl(ioaddr + SRTC_LPSCLR); + unsigned int timeout = REG_READ_TIMEOUT; + + while ((readl(ioaddr + SRTC_LPSCLR)) == count) { + if (!--timeout) { + dev_err_once(dev, "SRTC_LPSCLR stuck! Check your hw.\n"); + return; + } + } + } +} + +/* This function is the RTC interrupt service routine. */ +static irqreturn_t mxc_rtc_interrupt(int irq, void *dev_id) +{ + struct device *dev = dev_id; + struct mxc_rtc_data *pdata = dev_get_drvdata(dev); + void __iomem *ioaddr = pdata->ioaddr; + unsigned long flags; + u32 lp_status; + u32 lp_cr; + + spin_lock_irqsave(&pdata->lock, flags); + if (clk_enable(pdata->clk)) { + spin_unlock_irqrestore(&pdata->lock, flags); + return IRQ_NONE; + } + + lp_status = readl(ioaddr + SRTC_LPSR); + lp_cr = readl(ioaddr + SRTC_LPCR); + + /* update irq data & counter */ + if (lp_status & SRTC_LPSR_ALP) { + if (lp_cr & SRTC_LPCR_ALP) + rtc_update_irq(pdata->rtc, 1, RTC_AF | RTC_IRQF); + + /* disable further lp alarm interrupts */ + lp_cr &= ~(SRTC_LPCR_ALP | SRTC_LPCR_WAE); + } + + /* Update interrupt enables */ + writel(lp_cr, ioaddr + SRTC_LPCR); + + /* clear interrupt status */ + writel(lp_status, ioaddr + SRTC_LPSR); + + mxc_rtc_sync_lp_locked(dev, ioaddr); + clk_disable(pdata->clk); + spin_unlock_irqrestore(&pdata->lock, flags); + return IRQ_HANDLED; +} + +/* + * Enable clk and aquire spinlock + * @return 0 if successful; non-zero otherwise. + */ +static int mxc_rtc_lock(struct mxc_rtc_data *const pdata) +{ + int ret; + + spin_lock_irq(&pdata->lock); + ret = clk_enable(pdata->clk); + if (ret) { + spin_unlock_irq(&pdata->lock); + return ret; + } + return 0; +} + +static int mxc_rtc_unlock(struct mxc_rtc_data *const pdata) +{ + clk_disable(pdata->clk); + spin_unlock_irq(&pdata->lock); + return 0; +} + +/* + * This function reads the current RTC time into tm in Gregorian date. + * + * @param tm contains the RTC time value upon return + * + * @return 0 if successful; non-zero otherwise. + */ +static int mxc_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + struct mxc_rtc_data *pdata = dev_get_drvdata(dev); + const int clk_failed = clk_enable(pdata->clk); + + if (!clk_failed) { + const time64_t now = readl(pdata->ioaddr + SRTC_LPSCMR); + + rtc_time64_to_tm(now, tm); + clk_disable(pdata->clk); + return 0; + } + return clk_failed; +} + +/* + * This function sets the internal RTC time based on tm in Gregorian date. + * + * @param tm the time value to be set in the RTC + * + * @return 0 if successful; non-zero otherwise. + */ +static int mxc_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + struct mxc_rtc_data *pdata = dev_get_drvdata(dev); + time64_t time = rtc_tm_to_time64(tm); + int ret; + + if (time > U32_MAX) { + dev_err(dev, "RTC exceeded by %llus\n", time - U32_MAX); + return -EINVAL; + } + + ret = mxc_rtc_lock(pdata); + if (ret) + return ret; + + writel(time, pdata->ioaddr + SRTC_LPSCMR); + mxc_rtc_sync_lp_locked(dev, pdata->ioaddr); + return mxc_rtc_unlock(pdata); +} + +/* + * This function reads the current alarm value into the passed in \b alrm + * argument. It updates the \b alrm's pending field value based on the whether + * an alarm interrupt occurs or not. + * + * @param alrm contains the RTC alarm value upon return + * + * @return 0 if successful; non-zero otherwise. + */ +static int mxc_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct mxc_rtc_data *pdata = dev_get_drvdata(dev); + void __iomem *ioaddr = pdata->ioaddr; + int ret; + + ret = mxc_rtc_lock(pdata); + if (ret) + return ret; + + rtc_time_to_tm(readl(ioaddr + SRTC_LPSAR), &alrm->time); + alrm->pending = !!(readl(ioaddr + SRTC_LPSR) & SRTC_LPSR_ALP); + return mxc_rtc_unlock(pdata); +} + +/* + * Enable/Disable alarm interrupt + * The caller should hold the pdata->lock + */ +static void mxc_rtc_alarm_irq_enable_locked(struct mxc_rtc_data *pdata, + unsigned int enable) +{ + u32 lp_cr = readl(pdata->ioaddr + SRTC_LPCR); + + if (enable) + lp_cr |= (SRTC_LPCR_ALP | SRTC_LPCR_WAE); + else + lp_cr &= ~(SRTC_LPCR_ALP | SRTC_LPCR_WAE); + + writel(lp_cr, pdata->ioaddr + SRTC_LPCR); +} + +static int mxc_rtc_alarm_irq_enable(struct device *dev, unsigned int enable) +{ + struct mxc_rtc_data *pdata = dev_get_drvdata(dev); + int ret = mxc_rtc_lock(pdata); + + if (ret) + return ret; + + mxc_rtc_alarm_irq_enable_locked(pdata, enable); + return mxc_rtc_unlock(pdata); +} + +/* + * This function sets the RTC alarm based on passed in alrm. + * + * @param alrm the alarm value to be set in the RTC + * + * @return 0 if successful; non-zero otherwise. + */ +static int mxc_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + const time64_t time = rtc_tm_to_time64(&alrm->time); + struct mxc_rtc_data *pdata = dev_get_drvdata(dev); + int ret = mxc_rtc_lock(pdata); + + if (ret) + return ret; + + if (time > U32_MAX) { + dev_err(dev, "Hopefully I am out of service by then :-(\n"); + return -EINVAL; + } + + writel((u32)time, pdata->ioaddr + SRTC_LPSAR); + + /* clear alarm interrupt status bit */ + writel(SRTC_LPSR_ALP, pdata->ioaddr + SRTC_LPSR); + mxc_rtc_sync_lp_locked(dev, pdata->ioaddr); + + mxc_rtc_alarm_irq_enable_locked(pdata, alrm->enabled); + mxc_rtc_sync_lp_locked(dev, pdata->ioaddr); + mxc_rtc_unlock(pdata); + return ret; +} + +static const struct rtc_class_ops mxc_rtc_ops = { + .read_time = mxc_rtc_read_time, + .set_time = mxc_rtc_set_time, + .read_alarm = mxc_rtc_read_alarm, + .set_alarm = mxc_rtc_set_alarm, + .alarm_irq_enable = mxc_rtc_alarm_irq_enable, +}; + +static int mxc_rtc_wait_for_flag(void *__iomem ioaddr, int flag) +{ + unsigned int timeout = REG_READ_TIMEOUT; + + while (!(readl(ioaddr) & flag)) { + if (!--timeout) + return -EBUSY; + } + return 0; +} + +static int mxc_rtc_probe(struct platform_device *pdev) +{ + struct mxc_rtc_data *pdata; + struct resource *res; + void __iomem *ioaddr; + int ret = 0; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + pdata->ioaddr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(pdata->ioaddr)) + return PTR_ERR(pdata->ioaddr); + + ioaddr = pdata->ioaddr; + + pdata->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(pdata->clk)) { + dev_err(&pdev->dev, "unable to get rtc clock!\n"); + return PTR_ERR(pdata->clk); + } + + spin_lock_init(&pdata->lock); + pdata->irq = platform_get_irq(pdev, 0); + if (pdata->irq < 0) + return pdata->irq; + + device_init_wakeup(&pdev->dev, 1); + + ret = clk_prepare_enable(pdata->clk); + if (ret) + return ret; + /* initialize glitch detect */ + writel(SRTC_LPPDR_INIT, ioaddr + SRTC_LPPDR); + + /* clear lp interrupt status */ + writel(0xFFFFFFFF, ioaddr + SRTC_LPSR); + + /* move out of init state */ + writel((SRTC_LPCR_IE | SRTC_LPCR_NSA), ioaddr + SRTC_LPCR); + ret = mxc_rtc_wait_for_flag(ioaddr + SRTC_LPSR, SRTC_LPSR_IES); + if (ret) { + dev_err(&pdev->dev, "Timeout waiting for SRTC_LPSR_IES\n"); + clk_disable_unprepare(pdata->clk); + return ret; + } + + /* move out of non-valid state */ + writel((SRTC_LPCR_IE | SRTC_LPCR_NVE | SRTC_LPCR_NSA | + SRTC_LPCR_EN_LP), ioaddr + SRTC_LPCR); + ret = mxc_rtc_wait_for_flag(ioaddr + SRTC_LPSR, SRTC_LPSR_NVES); + if (ret) { + dev_err(&pdev->dev, "Timeout waiting for SRTC_LPSR_NVES\n"); + clk_disable_unprepare(pdata->clk); + return ret; + } + + clk_disable(pdata->clk); + platform_set_drvdata(pdev, pdata); + ret = + devm_request_irq(&pdev->dev, pdata->irq, mxc_rtc_interrupt, 0, + pdev->name, &pdev->dev); + if (ret < 0) { + dev_err(&pdev->dev, "interrupt not available.\n"); + clk_unprepare(pdata->clk); + return ret; + } + + pdata->rtc = + devm_rtc_device_register(&pdev->dev, pdev->name, &mxc_rtc_ops, + THIS_MODULE); + if (IS_ERR(pdata->rtc)) { + clk_unprepare(pdata->clk); + return PTR_ERR(pdata->rtc); + } + + return 0; +} + +static int __exit mxc_rtc_remove(struct platform_device *pdev) +{ + struct mxc_rtc_data *pdata = platform_get_drvdata(pdev); + + clk_disable_unprepare(pdata->clk); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int mxc_rtc_suspend(struct device *dev) +{ + struct mxc_rtc_data *pdata = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + enable_irq_wake(pdata->irq); + + return 0; +} + +static int mxc_rtc_resume(struct device *dev) +{ + struct mxc_rtc_data *pdata = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + disable_irq_wake(pdata->irq); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(mxc_rtc_pm_ops, mxc_rtc_suspend, mxc_rtc_resume); + +static const struct of_device_id mxc_ids[] = { + { .compatible = "fsl,imx53-rtc", }, + {} +}; + +static struct platform_driver mxc_rtc_driver = { + .driver = { + .name = "mxc_rtc_v2", + .of_match_table = mxc_ids, + .pm = &mxc_rtc_pm_ops, + }, + .probe = mxc_rtc_probe, + .remove = mxc_rtc_remove, +}; + +module_platform_driver(mxc_rtc_driver); + +MODULE_AUTHOR("Freescale Semiconductor, Inc."); +MODULE_DESCRIPTION("Real Time Clock (RTC) Driver for i.MX53"); +MODULE_LICENSE("GPL"); -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
