Modify the properties of usb wakeup, and use the new way of mtu_wakeup which is extracted from SSUSB controller dirver as a new driver. Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> --- Documentation/devicetree/bindings/usb/mediatek,mtu3.txt | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt index b2271d8..2ed546d 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt @@ -42,9 +42,17 @@ Optional properties: - enable-manual-drd : supports manual dual-role switch via debugfs; usually used when receptacle is TYPE-A and also wants to support dual-role mode. - - mediatek,enable-wakeup : supports ip sleep wakeup used by host mode - - mediatek,syscon-wakeup : phandle to syscon used to access USB wakeup - control register, it depends on "mediatek,enable-wakeup". + - mediatek,uwks : a phandle to USB-Wakeup node to control the type of wakeup, + it's used to replace the old way which is realized by the property of + "mediatek,wakeup-wakeup" and "mediatek,syscon-wakeup", + see: Documentation/devicetree/bindings/soc/mediatek/usb-wakeup.txt + - wakeup-source : Decides if the new way of USB wakeup is supported or + not, it depends on "mediatek,uwks" property. + - mediatek,enable-wakeup : (deprecated) supports ip sleep wakeup used by + host mode, only supports mt8173 platform, use the property of + "mediatek,uwks" instead on other SoCs. + - mediatek,syscon-wakeup : (deprecated) phandle to syscon used to access + USB wakeup control register, it depends on "mediatek,enable-wakeup". - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0, bit1 for u3port1, ... etc; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
