On Tue, Feb 4, 2014 at 9:17 PM, Matt Porter <mporter@xxxxxxxxxx> wrote:
> On Tue, Feb 04, 2014 at 08:52:26PM -0800, Matt Ranostay Matt Ranostay wrote:
>> On Tue, Feb 4, 2014 at 8:43 PM, Matt Porter <mporter@xxxxxxxxxx> wrote:
>> > On Tue, Feb 04, 2014 at 07:14:55PM -0800, Matt Ranostay Matt Ranostay wrote:
>> >> Document compatible string, required and optional DT properties for
>> >> AS3935 chipset driver.
>> >>
>> >> Signed-off-by: Matt Ranostay <mranostay@xxxxxxxxx>
>> >> ---
>> >> .../devicetree/bindings/iio/proximity/as3935.txt | 25 ++++++++++++++++++++++
>> >> 1 file changed, 25 insertions(+)
>> >> create mode 100644 Documentation/devicetree/bindings/iio/proximity/as3935.txt
>> >>
>> >> diff --git a/Documentation/devicetree/bindings/iio/proximity/as3935.txt b/Documentation/devicetree/bindings/iio/proximity/as3935.txt
>> >> new file mode 100644
>> >> index 0000000..7e117cd
>> >> --- /dev/null
>> >> +++ b/Documentation/devicetree/bindings/iio/proximity/as3935.txt
>> >> @@ -0,0 +1,25 @@
>> >> +Austrian Microsystems AS3935 Franklin lightning sensor device driver
>> >> +
>> >> +Required properties:
>> >> + - compatible: must be "ams,as3935"
>> >
>> > Change this to "amstaos,as3935"
>> >
>> > amstaos (AMS bought Taos) is already a registered vendor prefix in
>> > vendor-prefixes.txt
>> >
>> >> + - reg: SPI chip select number for the device
>> >> + - spi-cpha: SPI Mode 1
>> >
>> > When using generic binding properties, please reference the binding
>> > being used. Like:
>> >
>> > - spi-cpha: SPI Mode 1. Refer to spi/spi-bus.txt for generic SPI
>> > slave node bindings.
>> >
>> Noted.
>>
>> >> + - interrupt-parent : should be the phandle for the interrupt controller
>> >> + - interrupts : interrupt mapping for GPIO IRQ
>> >
>> > Refer to interrupt-controller/interrupts.txt for generic
>> > interrupt client node bindings.
>> >
>> Noted.
>>
>> >> +
>> >> +Optional properties:
>> >> + - ams,tune-cap: Calibration tuning capacitor stepping value 0 - 15.
>> >> + Range of 0 to 120 pF, 8pF steps. This will require using the
>> >> + calibration data from the manufacturer.
>> >> +
>> >> +
>> >> +Example:
>> >> +
>> >> +as3935@0 {
>> >> + compatible = "ams,as3935";
>> >> + reg = <0>;
>> >> + spi-cpha;
>> >> + interrupt-parent = <&gpio1>;
>> >> + interrupts = <16 1>;
>> >> + ams,tune-cap = /bits/ 8 <10>;
>> >
>> > What is this? Why not just ams,tune-cap = <10>; ?
>> >
>> > It's a value between 0-15, right?
>>
>> Correct but it is using of_property_read_u8() so that requires the
>> /bits/ statement.
>> Should this just be a u32 value?
>
> Do you really need a u8? If not just read_u32() into an int and keep
> this syntax simple.
Just me different it seems :P. Will fix in next version waiting for
Peter's and Jonathan's input on the rest of the code first.
>
> -Matt
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
