On Tue, Dec 05, 2017 at 02:43:23PM -0600, Dan Murphy wrote:
> Update the lp8860 label binding to the LED
> standard as documented in
>
> Documentation/devicetree/bindings/leds/common.txt
>
> Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
> ---
>
> v2 - Added reg to child node and made it required
>
> Documentation/devicetree/bindings/leds/leds-lp8860.txt | 12 ++++++++++--
> 1 file changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
> index 1b2fab05ec6a..22b594d95162 100644
> --- a/Documentation/devicetree/bindings/leds/leds-lp8860.txt
> +++ b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
> @@ -9,7 +9,6 @@ Required properties:
> - compatible :
> "ti,lp8860"
> - reg : I2C slave address
> - - label : Used for naming LEDs
> - #address-cells : 1
> - #size-cells : 0
>
> @@ -17,6 +16,12 @@ Optional properties:
> - enable-gpios : gpio pin to enable/disable the device.
> - supply : "vled" - LED supply
>
> +Required child properties:
> + - reg : 0
> +
> +Optional child properties:
> + - label : see Documentation/devicetree/bindings/leds/common.txt
> +
> Example:
>
> lp8860@2d {
> @@ -24,9 +29,12 @@ Example:
> #address-cells: 1
> #size-cells: 0
> reg = <0x2d>;
> - label = "display_cluster";
> enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
> vled-supply = <&vbatt>;
> + display_cluster: display_cluster@0 {
led@0 {
Do you really need a (dts) label here?
> + reg=<0>;
spaces around the '='.
> + label = "display_cluster";
> + };
> }
>
> For more product information please see the link below:
> --
> 2.15.0.124.g7668cbc60
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
