From: Richard Leitner <richard.leitner@xxxxxxxxxxx> The Microchip/SMSC LAN8710/LAN8720 PHYs need (according to their datasheet [1]) a continuous REF_CLK when configured to "REF_CLK In Mode". Therefore set the PHY_RST_AFTER_CLK_EN flag for those PHYs to let the ETH driver reset them after the REF_CLK is enabled. [1] http://ww1.microchip.com/downloads/en/DeviceDoc/00002165B.pdf Signed-off-by: Richard Leitner <richard.leitner@xxxxxxxxxxx> Reviewed-by: Andrew Lunn <andrew@xxxxxxx> --- drivers/net/phy/smsc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index a1961ba87e2b..be399d645224 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -312,7 +312,7 @@ static struct phy_driver smsc_phy_driver[] = { .name = "SMSC LAN8710/LAN8720", .features = PHY_BASIC_FEATURES, - .flags = PHY_HAS_INTERRUPT, + .flags = PHY_HAS_INTERRUPT | PHY_RST_AFTER_CLK_EN, .probe = smsc_phy_probe, -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
