Add simple-bus compatibility and ranges properties to cm1, cm2 and prm
nodes. This is done in preparation of adding the support for clkctrl
nodes.
Signed-off-by: Tero Kristo <t-kristo@xxxxxx>
---
arch/arm/boot/dts/omap4.dtsi | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 56fdde3..787ea2a 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -143,8 +143,11 @@
ranges = <0 0x4a000000 0x1000000>;
cm1: cm1@4000 {
- compatible = "ti,omap4-cm1";
+ compatible = "ti,omap4-cm1", "simple-bus";
reg = <0x4000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4000 0x2000>;
cm1_clocks: clocks {
#address-cells = <1>;
@@ -156,8 +159,11 @@
};
cm2: cm2@8000 {
- compatible = "ti,omap4-cm2";
+ compatible = "ti,omap4-cm2", "simple-bus";
reg = <0x8000 0x3000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x8000 0x3000>;
cm2_clocks: clocks {
#address-cells = <1>;
@@ -243,6 +249,9 @@
compatible = "ti,omap4-prm";
reg = <0x6000 0x3000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x6000 0x3000>;
prm_clocks: clocks {
#address-cells = <1>;
--
1.9.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
