Add simple-bus compatibility and ranges properties to cm_core_aon, cm_core
and prm nodes. This is done in preparation of adding the support for
clkctrl nodes.
Signed-off-by: Tero Kristo <t-kristo@xxxxxx>
---
arch/arm/boot/dts/omap5.dtsi | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 404c78f..b0992b8 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -201,8 +201,12 @@
};
cm_core_aon: cm_core_aon@4000 {
- compatible = "ti,omap5-cm-core-aon";
+ compatible = "ti,omap5-cm-core-aon",
+ "simple-bus";
reg = <0x4000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4000 0x2000>;
cm_core_aon_clocks: clocks {
#address-cells = <1>;
@@ -214,8 +218,11 @@
};
cm_core: cm_core@8000 {
- compatible = "ti,omap5-cm-core";
+ compatible = "ti,omap5-cm-core", "simple-bus";
reg = <0x8000 0x3000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x8000 0x3000>;
cm_core_clocks: clocks {
#address-cells = <1>;
@@ -240,9 +247,12 @@
};
prm: prm@6000 {
- compatible = "ti,omap5-prm";
+ compatible = "ti,omap5-prm", "simple-bus";
reg = <0x6000 0x3000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x6000 0x3000>;
prm_clocks: clocks {
#address-cells = <1>;
--
1.9.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
