On Tue 05 Dec 07:47 PST 2017, Georgi Djakov wrote:
> Add a driver for the APCS clock controller. It is part of the APCS
> hardware block, which among other things implements also a combined
> mux and half integer divider functionality. It can choose between a
> fixed-rate clock or the dedicated APCS (A53) PLL. The source and the
> divider can be set both at the same time.
>
> This is required for enabling CPU frequency scaling on MSM8916-based
> platforms.
>
Acked-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Regards,
Bjorn
> Signed-off-by: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
> ---
> drivers/clk/qcom/Kconfig | 11 +++
> drivers/clk/qcom/Makefile | 1 +
> drivers/clk/qcom/apcs-msm8916.c | 149 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 161 insertions(+)
> create mode 100644 drivers/clk/qcom/apcs-msm8916.c
>
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index 81ac7b9378fe..255023b439c9 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -22,6 +22,17 @@ config QCOM_A53PLL
> Say Y if you want to support higher CPU frequencies on MSM8916
> devices.
>
> +config QCOM_CLK_APCS_MSM8916
> + bool "MSM8916 APCS Clock Controller"
> + depends on COMMON_CLK_QCOM
> + depends on QCOM_APCS_IPC
> + default ARCH_QCOM
> + help
> + Support for the APCS Clock Controller on msm8916 devices. The
> + APCS is managing the mux and divider which feeds the CPUs.
> + Say Y if you want to support CPU frequency scaling on devices
> + such as msm8916.
> +
> config QCOM_CLK_RPM
> tristate "RPM based Clock Controller"
> depends on COMMON_CLK_QCOM && MFD_QCOM_RPM
> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
> index 7c51d877f967..0408cebf38d4 100644
> --- a/drivers/clk/qcom/Makefile
> +++ b/drivers/clk/qcom/Makefile
> @@ -34,5 +34,6 @@ obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o
> obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
> obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o
> obj-$(CONFIG_QCOM_A53PLL) += a53-pll.o
> +obj-$(CONFIG_QCOM_CLK_APCS_MSM8916) += apcs-msm8916.o
> obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
> obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
> diff --git a/drivers/clk/qcom/apcs-msm8916.c b/drivers/clk/qcom/apcs-msm8916.c
> new file mode 100644
> index 000000000000..832172c2fc8b
> --- /dev/null
> +++ b/drivers/clk/qcom/apcs-msm8916.c
> @@ -0,0 +1,149 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Qualcomm APCS clock controller driver
> + *
> + * Copyright (c) 2017, Linaro Limited
> + * Author: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/kernel.h>
> +#include <linux/mailbox_controller.h>
> +#include <linux/module.h>
> +#include <linux/io.h>
> +#include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include "clk-regmap.h"
> +#include "clk-regmap-mux-div.h"
> +
> +enum {
> + P_GPLL0,
> + P_A53PLL,
> +};
> +
> +static const struct parent_map gpll0_a53cc_map[] = {
> + { P_GPLL0, 4 },
> + { P_A53PLL, 5 },
> +};
> +
> +static const char * const gpll0_a53cc[] = {
> + "gpll0_vote",
> + "a53pll",
> +};
> +
> +/*
> + * We use the notifier function for switching to a temporary safe configuration
> + * (mux and divider), while the A53 PLL is reconfigured.
> + */
> +static int a53cc_notifier_cb(struct notifier_block *nb, unsigned long event,
> + void *data)
> +{
> + int ret = 0;
> + struct clk_regmap_mux_div *md = container_of(nb,
> + struct clk_regmap_mux_div,
> + clk_nb);
> + if (event == PRE_RATE_CHANGE)
> + /* set the mux and divider to safe frequency (400mhz) */
> + ret = __mux_div_set_src_div(md, 4, 3);
> +
> + return notifier_from_errno(ret);
> +}
> +
> +static int qcom_apcs_msm8916_clk_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device *parent = dev->parent;
> + struct clk_regmap_mux_div *a53cc;
> + struct regmap *regmap;
> + struct clk_init_data init = { };
> + int ret;
> +
> + regmap = dev_get_regmap(parent, NULL);
> + if (IS_ERR(regmap)) {
> + ret = PTR_ERR(regmap);
> + dev_err(dev, "failed to get regmap: %d\n", ret);
> + return ret;
> + }
> +
> + a53cc = devm_kzalloc(dev, sizeof(*a53cc), GFP_KERNEL);
> + if (!a53cc)
> + return -ENOMEM;
> +
> + init.name = "a53mux";
> + init.parent_names = gpll0_a53cc;
> + init.num_parents = ARRAY_SIZE(gpll0_a53cc);
> + init.ops = &clk_regmap_mux_div_ops;
> + init.flags = CLK_SET_RATE_PARENT;
> +
> + a53cc->clkr.hw.init = &init;
> + a53cc->clkr.regmap = regmap;
> + a53cc->reg_offset = 0x50;
> + a53cc->hid_width = 5;
> + a53cc->hid_shift = 0;
> + a53cc->src_width = 3;
> + a53cc->src_shift = 8;
> + a53cc->parent_map = gpll0_a53cc_map;
> +
> + a53cc->pclk = devm_clk_get(parent, NULL);
> + if (IS_ERR(a53cc->pclk)) {
> + ret = PTR_ERR(a53cc->pclk);
> + dev_err(dev, "failed to get clk: %d\n", ret);
> + return ret;
> + }
> +
> + a53cc->clk_nb.notifier_call = a53cc_notifier_cb;
> + ret = clk_notifier_register(a53cc->pclk, &a53cc->clk_nb);
> + if (ret) {
> + dev_err(dev, "failed to register clock notifier: %d\n", ret);
> + return ret;
> + }
> +
> + ret = devm_clk_register_regmap(dev, &a53cc->clkr);
> + if (ret) {
> + dev_err(dev, "failed to register regmap clock: %d\n", ret);
> + goto err;
> + }
> +
> + ret = of_clk_add_hw_provider(parent->of_node, of_clk_hw_simple_get,
> + &a53cc->clkr.hw);
> + if (ret) {
> + dev_err(dev, "failed to add clock provider: %d\n", ret);
> + goto err;
> + }
> +
> + platform_set_drvdata(pdev, a53cc);
> +
> + return 0;
> +
> +err:
> + clk_notifier_unregister(a53cc->pclk, &a53cc->clk_nb);
> + return ret;
> +}
> +
> +static int qcom_apcs_msm8916_clk_remove(struct platform_device *pdev)
> +{
> + struct clk_regmap_mux_div *a53cc = platform_get_drvdata(pdev);
> + struct device *parent = pdev->dev.parent;
> +
> + clk_notifier_unregister(a53cc->pclk, &a53cc->clk_nb);
> + of_clk_del_provider(parent->of_node);
> +
> + return 0;
> +}
> +
> +static struct platform_driver qcom_apcs_msm8916_clk_driver = {
> + .probe = qcom_apcs_msm8916_clk_probe,
> + .remove = qcom_apcs_msm8916_clk_remove,
> + .driver = {
> + .name = "qcom-apcs-msm8916-clk",
> + },
> +};
> +module_platform_driver(qcom_apcs_msm8916_clk_driver);
> +
> +MODULE_AUTHOR("Georgi Djakov <georgi.djakov@xxxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("Qualcomm MSM8916 APCS clock driver");
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
