Hi Christopher,
On 02/04/2014 03:19 PM, Christopher Covington wrote:
Hi Georgi,
On 01/30/2014 01:45 PM, Georgi Djakov wrote:
This patchset adds basic support of the Secure Digital Host Controller
Interface compliant controller found in Qualcomm chipsets.
Tested with eMMC and various micro SD cards on APQ8074 Dragonboard.
[...]
.../devicetree/bindings/mmc/sdhci-msm.txt | 83 ++
drivers/mmc/host/Kconfig | 13 +
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/sdhci-msm.c | 938 ++++++++++++++++++++
4 files changed, 1035 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-msm.txt
create mode 100644 drivers/mmc/host/sdhci-msm.c
You must have added entries to the Dragonboard device tree source to test
these changes. Why not include them with this patchset? Is there a stand-alone
patch that I've overlooked?
There have been recently many changes to the devicetree files and in
order to avoid possible conflicts i have not added DT nodes yet. But
I'll consider adding them, and maybe enable it in the defconfig too.
Thanks for your suggestion.
To get it working, take a look at the binding example or just use the
following:
sdhci1@f9824900 {
compatible = "qcom,sdhci-msm";
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
reg-names = "hc_mem", "core_mem";
interrupts = <0 123 0>, <0 138 0>;
interrupt-names = "hc_irq", "pwr_irq";
bus-width = <8>;
non-removable;
clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
clock-names = "core", "iface";
};
sdhci2@f98a4900 {
compatible = "qcom,sdhci-msm";
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
reg-names = "hc_mem", "core_mem";
interrupts = <0 125 0>, <0 221 0>;
interrupt-names = "hc_irq", "pwr_irq";
bus-width = <4>;
clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
clock-names = "core", "iface";
};
Thanks,
Georgi
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html