From: Richard Leitner <richard.leitner@xxxxxxxxxxx> This patch series fixes the use of the SMSC LAN8710/20 with a Freescale ETH when the refclk is generated by the FSL. This patch depends on the "phylib: Add device reset GPIO support" patch submitted by Geert Uytterhoeven/Sergei Shtylyov, see: https://patchwork.kernel.org/patch/10090149/ Changes v3: - use phylib to hard-reset the PHY - implement reset delays in phylib - add new phylib API & flag (PHY_RST_AFTER_CLK_EN) to determine if a PHY is affected Changes v2: - simplify and fix fec_reset_phy function to support multiple calls - include: linux: phy: harmonize phy_id{,_mask} type - reset the phy instead of not turning the clock on and off (which would have caused a power consumption regression) Richard Leitner (4): phylib: Add device reset delay support phylib: add reset after clk enable support net: phy: smsc: LAN8710/20: add PHY_RST_AFTER_CLK_EN flag net: fec: add phy_reset_after_clk_enable() support Documentation/devicetree/bindings/net/phy.txt | 10 ++++++++++ drivers/net/ethernet/freescale/fec_main.c | 7 +++++++ drivers/net/phy/mdio_device.c | 13 +++++++++++-- drivers/net/phy/phy_device.c | 24 ++++++++++++++++++++++++ drivers/net/phy/smsc.c | 2 +- drivers/of/of_mdio.c | 8 ++++++++ include/linux/mdio.h | 2 ++ include/linux/phy.h | 2 ++ 8 files changed, 65 insertions(+), 3 deletions(-) -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
