Re: [PATCH v3 2/3] clk: hisilicon: Add support for Hi3660 stub clocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Fri, Nov 17, 2017 at 05:27:31PM +0800, Xu YiPing wrote:
> From: Kaihua Zhong <zhongkaihua@xxxxxxxxxx>
> 
> Hi3660 has four stub clocks, which are big and LITTLE cluster clocks,
> GPU clock and DDR clock.  These clocks ask MCU for frequency scaling
> by sending message through mailbox.
> 
> This commit adds support for stub clocks, it requests the dedicated
> mailbox channel at initialization; then later uses this channel to send
> message to MCU to execute frequency scaling. The four stub clocks share
> the same mailbox channel, but every stub clock has its own command id so
> MCU can distinguish the requirement coming for which clock.
> 
> A shared memory is used to present effective frequency value, so the
> clock driver uses I/O mapping for the memory and reads back rate value.

Hi Michael, Stephen,

Could you help review this patch?

> Reviewed-by: Leo Yan <leo.yan@xxxxxxxxxx>
> Signed-off-by: Kai Zhao <zhaokai1@xxxxxxxxxxxxx>
> Signed-off-by: Tao Wang <kevin.wangtao@xxxxxxxxxxxxx>
> Signed-off-by: Ruyi Wang <wangruyi@xxxxxxxxxx>
> Signed-off-by: Kaihua Zhong <zhongkaihua@xxxxxxxxxx>
> ---
>  drivers/clk/hisilicon/Kconfig           |   6 ++
>  drivers/clk/hisilicon/Makefile          |   1 +
>  drivers/clk/hisilicon/clk-hi3660-stub.c | 186 ++++++++++++++++++++++++++++++++
>  3 files changed, 193 insertions(+)
>  create mode 100644 drivers/clk/hisilicon/clk-hi3660-stub.c
> 
> diff --git a/drivers/clk/hisilicon/Kconfig b/drivers/clk/hisilicon/Kconfig
> index 7098bfd..1bd4355 100644
> --- a/drivers/clk/hisilicon/Kconfig
> +++ b/drivers/clk/hisilicon/Kconfig
> @@ -49,3 +49,9 @@ config STUB_CLK_HI6220
>  	default ARCH_HISI
>  	help
>  	  Build the Hisilicon Hi6220 stub clock driver.
> +
> +config STUB_CLK_HI3660
> +	bool "Hi3660 Stub Clock Driver"
> +	depends on COMMON_CLK_HI3660 && MAILBOX
> +	help
> +	  Build the Hisilicon Hi3660 stub clock driver.
> diff --git a/drivers/clk/hisilicon/Makefile b/drivers/clk/hisilicon/Makefile
> index 1e4c3dd..0a5b499 100644
> --- a/drivers/clk/hisilicon/Makefile
> +++ b/drivers/clk/hisilicon/Makefile
> @@ -14,3 +14,4 @@ obj-$(CONFIG_COMMON_CLK_HI3798CV200)	+= crg-hi3798cv200.o
>  obj-$(CONFIG_COMMON_CLK_HI6220)	+= clk-hi6220.o
>  obj-$(CONFIG_RESET_HISI)	+= reset.o
>  obj-$(CONFIG_STUB_CLK_HI6220)	+= clk-hi6220-stub.o
> +obj-$(CONFIG_STUB_CLK_HI3660)	+= clk-hi3660-stub.o
> diff --git a/drivers/clk/hisilicon/clk-hi3660-stub.c b/drivers/clk/hisilicon/clk-hi3660-stub.c
> new file mode 100644
> index 0000000..607efa4
> --- /dev/null
> +++ b/drivers/clk/hisilicon/clk-hi3660-stub.c
> @@ -0,0 +1,186 @@
> +/*
> + * Hisilicon clock driver
> + *
> + * Copyright (c) 2013-2017 Hisilicon Limited.
> + * Copyright (c) 2017 Linaro Limited.
> + *
> + * Author: Kai Zhao <zhaokai1@xxxxxxxxxxxxx>
> + *	    Tao Wang <kevin.wangtao@xxxxxxxxxxxxx>
> + *	    Leo Yan <leo.yan@xxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/mailbox_client.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <dt-bindings/clock/hi3660-clock.h>
> +
> +#define HI3660_STUB_CLOCK_DATA		(0x70)
> +#define MHZ				(1000 * 1000)
> +
> +#define DEFINE_CLK_STUB(_id, _cmd, _name)			\
> +	{							\
> +		.id = (_id),					\
> +		.cmd = (_cmd),					\
> +		.hw.init = &(struct clk_init_data) {		\
> +			.name = #_name,				\
> +			.ops = &hi3660_stub_clk_ops,		\
> +			.num_parents = 0,			\
> +			.flags = CLK_GET_RATE_NOCACHE,		\
> +		},						\
> +	},
> +
> +#define to_stub_clk(_hw) container_of(_hw, struct hi3660_stub_clk, hw)
> +
> +struct hi3660_stub_clk_chan {
> +	struct mbox_client cl;
> +	struct mbox_chan *mbox;
> +};
> +
> +struct hi3660_stub_clk {
> +	unsigned int id;
> +	struct clk_hw hw;
> +	unsigned int cmd;
> +	unsigned int msg[8];
> +	unsigned int rate;
> +};
> +
> +static void __iomem *freq_reg;
> +static struct hi3660_stub_clk_chan stub_clk_chan;
> +
> +static unsigned long hi3660_stub_clk_recalc_rate(struct clk_hw *hw,
> +						 unsigned long parent_rate)
> +{
> +	struct hi3660_stub_clk *stub_clk = to_stub_clk(hw);
> +
> +	/*
> +	 * LPM3 writes back the CPU frequency in shared SRAM so read
> +	 * back the frequency.
> +	 */
> +	stub_clk->rate = readl(freq_reg + (stub_clk->id << 2)) * MHZ;
> +	return stub_clk->rate;
> +}
> +
> +static long hi3660_stub_clk_round_rate(struct clk_hw *hw, unsigned long rate,
> +				       unsigned long *prate)
> +{
> +	/*
> +	 * LPM3 handles rate rounding so just return whatever
> +	 * rate is requested.
> +	 */
> +	return rate;
> +}
> +
> +static int hi3660_stub_clk_set_rate(struct clk_hw *hw, unsigned long rate,
> +				    unsigned long parent_rate)
> +{
> +	struct hi3660_stub_clk *stub_clk = to_stub_clk(hw);
> +
> +	stub_clk->msg[0] = stub_clk->cmd;
> +	stub_clk->msg[1] = rate / MHZ;
> +
> +	dev_dbg(stub_clk_chan.cl.dev, "set rate msg[0]=0x%x msg[1]=0x%x\n",
> +		stub_clk->msg[0], stub_clk->msg[1]);
> +
> +	mbox_send_message(stub_clk_chan.mbox, stub_clk->msg);
> +	mbox_client_txdone(stub_clk_chan.mbox, 0);
> +
> +	stub_clk->rate = rate;
> +	return 0;
> +}
> +
> +static const struct clk_ops hi3660_stub_clk_ops = {
> +	.recalc_rate    = hi3660_stub_clk_recalc_rate,
> +	.round_rate     = hi3660_stub_clk_round_rate,
> +	.set_rate       = hi3660_stub_clk_set_rate,
> +};
> +
> +static struct hi3660_stub_clk hi3660_stub_clks[HI3660_CLK_STUB_NUM] = {
> +	DEFINE_CLK_STUB(HI3660_CLK_STUB_CLUSTER0, 0x0001030A, "cpu-cluster.0")
> +	DEFINE_CLK_STUB(HI3660_CLK_STUB_CLUSTER1, 0x0002030A, "cpu-cluster.1")
> +	DEFINE_CLK_STUB(HI3660_CLK_STUB_GPU, 0x0003030A, "clk-g3d")
> +	DEFINE_CLK_STUB(HI3660_CLK_STUB_DDR, 0x00040309, "clk-ddrc")
> +};
> +
> +static struct clk_hw *hi3660_stub_clk_hw_get(struct of_phandle_args *clkspec,
> +					     void *data)
> +{
> +	unsigned int idx = clkspec->args[0];
> +
> +	if (idx > HI3660_CLK_STUB_NUM) {
> +		pr_err("%s: invalid index %u\n", __func__, idx);
> +		return ERR_PTR(-EINVAL);
> +	}
> +
> +	return &hi3660_stub_clks[idx].hw;
> +}
> +
> +static int hi3660_stub_clk_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct resource *res;
> +	unsigned int i;
> +	int ret;
> +
> +	/* Use mailbox client without blocking */
> +	stub_clk_chan.cl.dev = dev;
> +	stub_clk_chan.cl.tx_done = NULL;
> +	stub_clk_chan.cl.tx_block = false;
> +	stub_clk_chan.cl.knows_txdone = false;
> +
> +	/* Allocate mailbox channel */
> +	stub_clk_chan.mbox = mbox_request_channel(&stub_clk_chan.cl, 0);
> +	if (IS_ERR(stub_clk_chan.mbox))
> +		return PTR_ERR(stub_clk_chan.mbox);
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	freq_reg = devm_ioremap(dev, res->start, resource_size(res));
> +	if (IS_ERR(freq_reg))
> +		return -ENOMEM;
> +
> +	freq_reg += HI3660_STUB_CLOCK_DATA;
> +
> +	for (i = 0; i < HI3660_CLK_STUB_NUM; i++) {
> +		ret = devm_clk_hw_register(&pdev->dev, &hi3660_stub_clks[i].hw);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	ret = of_clk_add_hw_provider(pdev->dev.of_node, hi3660_stub_clk_hw_get,
> +				     hi3660_stub_clks);
> +	return ret;
> +}
> +
> +static const struct of_device_id hi3660_stub_clk_of_match[] = {
> +	{ .compatible = "hisilicon,hi3660-stub-clk", },
> +	{}
> +};
> +
> +static struct platform_driver hi3660_stub_clk_driver = {
> +	.probe	= hi3660_stub_clk_probe,
> +	.driver = {
> +		.name = "hi3660-stub-clk",
> +		.of_match_table = hi3660_stub_clk_of_match,
> +	},
> +};
> +
> +static int __init hi3660_stub_clk_init(void)
> +{
> +	return platform_driver_register(&hi3660_stub_clk_driver);
> +}
> +subsys_initcall(hi3660_stub_clk_init);
> -- 
> 1.9.1
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux