On Sat, Dec 02, 2017 at 12:06:39PM +0100, Linus Walleij wrote:
> This adds the device tree bindings for the Gemini ethernet
> controller. It is pretty straight-forward, using standard
> bindings and modelling the two child ports as child devices
> under the parent ethernet controller device.
>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Cc: Tobias Waldvogel <tobias.waldvogel@xxxxxxxxx>
> Cc: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
> ---
> .../bindings/net/cortina,gemini-ethernet.txt | 92 ++++++++++++++++++++++
> 1 file changed, 92 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt
>
> diff --git a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt
> new file mode 100644
> index 000000000000..35fa3abd1c73
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt
> @@ -0,0 +1,92 @@
> +Cortina Systems Gemini Ethernet Controller
> +==========================================
> +
> +This ethernet controller is found in the Gemini SoC family:
> +StorLink SL3512 and SL3516, also known as Cortina Systems
> +CS3512 and CS3516.
> +
> +Required properties:
> +- compatible: must be "cortina,gemini-ethernet"
> +- reg: must contain the global registers and the V-bit and A-bit
> + memory areas, in total three register sets.
> +- syscon: a phandle to the system controller
> +- #address-cells: must be specified, must be <1>
> +- #size-cells: must be specified, must be <1>
> +- ranges: should be state like this giving a 1:1 address translation
> + for the subnodes
> +
> +The subnodes represents the two ethernet ports in this device.
> +They are not independent of each other since they share resources
> +in the parent node, and are thus children.
> +
> +Required subnodes:
> +- port0: contains the resources for ethernet port 0
> +- port1: contains the resources for ethernet port 1
> +
> +Required subnode properties:
> +- compatible: must be "cortina,gemini-ethernet-port"
> +- reg: must contain two register areas: the DMA/TOE memory and
> + the GMAC memory area of the port
> +- interrupts: should contain the interrupt line of the port.
> + this is nominally a level interrupt active high.
> +- resets: this must provide an SoC-integrated reset line for
> + the port.
> +- clocks: this should contain a handle to the PCLK clock for
> + clocking the silicon in this port
> +- clock-names: must be "PCLK"
> +
> +Optional subnode properties:
> +- phy-mode: see ethernet.txt
> +- phy-handle: see ethernet.txt
> +
> +Example:
> +
> +mdio-bus {
> + (...)
> + phy0: ethernet-phy@1 {
> + reg = <1>;
> + device_type = "ethernet-phy";
> + };
> + phy1: ethernet-phy@3 {
> + reg = <3>;
> + device_type = "ethernet-phy";
> + };
> +};
> +
> +
> +ethernet@60000000 {
> + compatible = "cortina,gemini-ethernet";
> + reg = <0x60000000 0x4000>, /* Global registers, queue */
> + <0x60004000 0x2000>, /* V-bit */
> + <0x60006000 0x2000>; /* A-bit */
> + syscon = <&syscon>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
Would be better to define the actual range used by child nodes.
> +
> + gmac0: port0 {
Needs a unit-address. Building with W=1 (or W=2) will tell you this.
As port is used by the OF graph binding, use ethernet-port@... instead.
> + compatible = "cortina,gemini-ethernet-port";
> + reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
> + <0x6000a000 0x2000>; /* Port 0 GMAC */
> + interrupt-parent = <&intcon>;
> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
> + resets = <&syscon GEMINI_RESET_GMAC0>;
> + clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
> + clock-names = "PCLK";
> + phy-mode = "rgmii";
> + phy-handle = <&phy0>;
> + };
> +
> + gmac1: port1 {
> + compatible = "cortina,gemini-ethernet-port";
> + reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
> + <0x6000e000 0x2000>; /* Port 1 GMAC */
> + interrupt-parent = <&intcon>;
> + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
> + resets = <&syscon GEMINI_RESET_GMAC1>;
> + clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
> + clock-names = "PCLK";
> + phy-mode = "rgmii";
> + phy-handle = <&phy1>;
> + };
> +};
> --
> 2.14.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
