When the HDMI controller device node was added, the needed PLL clock macros were not exported. A separate patch addresses that, but it is merged through a different tree. Now that both patches are in mainline proper, we can convert the raw numbers to proper macros. Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx> --- This is the remain bits of the HDMI series, converting raw index numbers in the device tree to ccu macros. This is a fix for 4.15. I've put all the platforms in one patch, though we should have done sun5i for the previous release. --- arch/arm/boot/dts/sun4i-a10.dtsi | 4 ++-- arch/arm/boot/dts/sun5i-a10s.dtsi | 4 ++-- arch/arm/boot/dts/sun6i-a31.dtsi | 4 ++-- arch/arm/boot/dts/sun7i-a20.dtsi | 4 ++-- 4 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index b91300d49a31..5840f5c75c3b 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -502,8 +502,8 @@ reg = <0x01c16000 0x1000>; interrupts = <58>; clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>, - <&ccu 9>, - <&ccu 18>; + <&ccu CLK_PLL_VIDEO0_2X>, + <&ccu CLK_PLL_VIDEO1_2X>; clock-names = "ahb", "mod", "pll-0", "pll-1"; dmas = <&dma SUN4I_DMA_NORMAL 16>, <&dma SUN4I_DMA_NORMAL 16>, diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 6ae4d95e230e..316cb8b2945b 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -82,8 +82,8 @@ reg = <0x01c16000 0x1000>; interrupts = <58>; clocks = <&ccu CLK_AHB_HDMI>, <&ccu CLK_HDMI>, - <&ccu 9>, - <&ccu 16>; + <&ccu CLK_PLL_VIDEO0_2X>, + <&ccu CLK_PLL_VIDEO1_2X>; clock-names = "ahb", "mod", "pll-0", "pll-1"; dmas = <&dma SUN4I_DMA_NORMAL 16>, <&dma SUN4I_DMA_NORMAL 16>, diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 8bfa12b548e0..72d3fe44ecaf 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -429,8 +429,8 @@ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_AHB1_HDMI>, <&ccu CLK_HDMI>, <&ccu CLK_HDMI_DDC>, - <&ccu 7>, - <&ccu 13>; + <&ccu CLK_PLL_VIDEO0_2X>, + <&ccu CLK_PLL_VIDEO1_2X>; clock-names = "ahb", "mod", "ddc", "pll-0", "pll-1"; resets = <&ccu RST_AHB1_HDMI>; reset-names = "ahb"; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 68dfa82544fc..59655e42e4b0 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -581,8 +581,8 @@ reg = <0x01c16000 0x1000>; interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>, - <&ccu 9>, - <&ccu 18>; + <&ccu CLK_PLL_VIDEO0_2X>, + <&ccu CLK_PLL_VIDEO1_2X>; clock-names = "ahb", "mod", "pll-0", "pll-1"; dmas = <&dma SUN4I_DMA_NORMAL 16>, <&dma SUN4I_DMA_NORMAL 16>, -- 2.15.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
