Add compatible strings for AP806 and CP110 that are part of the Armada 8k/7k line of SoCs. Add a note on the difference in the size of the control area in different bindings. This is an existing difference between the Armada 375 binding and the rest. The new AP806 and CP110 bindings are similar to the existing Armada 375 in this regard. Signed-off-by: Baruch Siach <baruch@xxxxxxxxxx> --- v2: No change --- Documentation/devicetree/bindings/thermal/armada-thermal.txt | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt index 24aacf8948c5..eec57f509166 100644 --- a/Documentation/devicetree/bindings/thermal/armada-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt @@ -7,12 +7,19 @@ Required properties: marvell,armada375-thermal marvell,armada380-thermal marvell,armadaxp-thermal + marvell,armada-ap806-thermal + marvell,armada-cp110-thermal - reg: Device's register space. Two entries are expected, see the examples below. The first one is required for the sensor register; - the second one is required for the control register + the second one is required for the control area to be used for sensor initialization (a.k.a. calibration). + The size of the control area must be 4 for + marvell,armada370-thermal, marvell,armada380-thermal, and + marvell,armadaxp-thermal. The size must be 8 for + marvell,armada375-thermal, marvell,armada-ap806-thermal, and + marvell,armada-cp110-thermal. Example: -- 2.15.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
