Re: [PATCH v4 00/10] add pinmuxing support for pins in AXP209 and AXP813 PMICs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Fri, Dec 1, 2017 at 2:44 PM, Quentin Schulz
<quentin.schulz@xxxxxxxxxxxxxxxxxx> wrote:

> The AXP209 and AXP813 PMICs have several pins (respectively 3 and 2) that can
> be used either as GPIOs or for other purposes (ADC or LDO here).
>
> We already have a GPIO driver for the GPIO use of those pins on the AXP209.
> Let's "upgrade" this driver to support all the functions these pins can have.
>
> Then we add support to this driver for the AXP813 which is slighlty different
> (basically a different offset in two registers and one less pin).
>
> I suggest patches 1 to 8 go through Linus's tree and 9 and 10 via Maxime or
> Chen-Yu's tree.
>
> v4:

Looks overall good. As soon as Maxime is happy with everything I will
happily apply 1-8 to the pinctrl tree and then pull it to GPIO as well to
avoid clashes.

I think there were some minor comments but it seems almost finished.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux