On Thu, Nov 30, 2017 at 6:14 PM, <tyler@xxxxxxxxxxxxxxxxxxxxxxx> wrote:
> From: Tyler Baker <tyler@xxxxxxxxxxxxxxxxxxxxxxx>
>
> Add device tree nodes for the USB hub, and USB OTG. i2c2 on this
> platform supports low state retention power state so lets use it.
>
> Signed-off-by: Tyler Baker <tyler@xxxxxxxxxxxxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 36 +++++++++++++++++++++++++--------
> 1 file changed, 28 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
> index ae45af1..a9f690b 100644
> --- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
> +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
> @@ -30,6 +30,16 @@
> gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
> enable-active-high;
> };
> +
> + reg_usbh_nreset: regulator@4 {
You should not use @4. Please make sure that regulators are not used
inside simple-bus.
> -
> pinctrl_uart1: uart1grp {
> fsl,pins = <
> MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
> @@ -284,4 +297,11 @@
> MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x14 /* OTG PWREN */
> >;
> };
> -};
> \ No newline at end of file
This text here looks strange :-)
> +
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + MX7D_PAD_LPSR_GPIO1_IO07__I2C2_SDA 0x4000000f
> + MX7D_PAD_LPSR_GPIO1_IO06__I2C2_SCL 0x4000000f
> + >;
> + };
> +};
> --
> 2.9.3
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
