On Thu, Nov 30, 2017 at 6:14 PM, <tyler@xxxxxxxxxxxxxxxxxxxxxxx> wrote: > +&ecspi3 { > + fsl,spi-num-chipselects = <1>; Please remove this property. It is no longer used. > + dvicape@39 { > + compatible = "sil164_simple"; This compatible string does not exist. > +&lcdif { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_lcdif_dat > + &pinctrl_lcdif_ctrl>; > + display = <&display0>; > + status = "okay"; > + > + display0: display { > + bits-per-pixel = <24>; > + bus-width = <24>; > + > + display-timings { > + native-mode = <&timing0>; > + timing0: dvi { > + /* 1024x768p60 */ > + clock-frequency = <65000000>; > + hactive = <1024>; > + hfront-porch = <40>; > + hback-porch = <220>; > + hsync-len = <60>; > + vactive = <768>; > + vfront-porch = <7>; > + vback-porch = <21>; > + vsync-len = <10>; > + > + hsync-active = <0>; > + vsync-active = <0>; > + de-active = <1>; > + pixelclk-active = <0>; Which panel is this? Could you use a simple panel driver compatible string instead? > + }; > + }; > + }; > +}; > + > +&uart2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart2>; > + assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>; > + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; > + fsl,uart-has-rtscts; Please use 'uart-has-rtscts' instead. > + status = "okay"; > +}; > + > +&uart5 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart5>; > + assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>; > + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; > + fsl,uart-has-rtscts; Ditto. > + status = "okay"; > +}; > + > +&uart7 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart7>; > + assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>; > + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; > + fsl,uart-has-rtscts; Ditto -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html