On 11/29/2017 11:10 AM, sean.wang@xxxxxxxxxxxx wrote:
From: Sean Wang <sean.wang@xxxxxxxxxxxx>
Fix that bananapi-r2 booting from SD-card would fail since incorrect
polarity is applied to the previous setup with GPIO_ACTIVE_HIGH.
Cc: stable@xxxxxxxxxxxxxxx # v4.14+
Fixes: 0eed8d097612 ("arm: dts: mt7623: Add SD-card and EMMC to bananapi-r2")
Signed-off-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
---
Tested-by: Matthias Brugger <matthias.bgg@xxxxxxxxx>
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index 688a863..7bf5aa2 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -204,7 +204,7 @@
bus-width = <4>;
max-frequency = <50000000>;
cap-sd-highspeed;
- cd-gpios = <&pio 261 0>;
+ cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
vmmc-supply = <&mt6323_vmch_reg>;
vqmmc-supply = <&mt6323_vio18_reg>;
};
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
