[PATCH 7/6] dt-bindings: tda998x: add the calibration gpio

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Add the optional calibration gpio for integrated TDA9950 CEC support.
This GPIO corresponds with the interrupt from the TDA998x, as the
calibration requires driving the interrupt pin low.

Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>
---
Sorry, this patch got forgotten, tacking it on the end of the series.

 Documentation/devicetree/bindings/display/bridge/tda998x.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/tda998x.txt b/Documentation/devicetree/bindings/display/bridge/tda998x.txt
index 24cc2466185a..ad6620560d63 100644
--- a/Documentation/devicetree/bindings/display/bridge/tda998x.txt
+++ b/Documentation/devicetree/bindings/display/bridge/tda998x.txt
@@ -27,6 +27,9 @@ Required properties;
 	in question is used. The implementation allows one or two DAIs. If two
 	DAIs are defined, they must be of different type.
 
+  - calib-gpio: calibration GPIO, which must correspond with the
+	gpio used for the TDA998x interrupt pin.
+
 [1] Documentation/sound/alsa/soc/DAI.txt
 [2] include/dt-bindings/display/tda998x.h
 
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux