Add device tree binding support for the QCOM BAM DMA driver.
Signed-off-by: Andy Gross <agross@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/dma/qcom_bam_dma.txt | 48 ++++++++++++++++++++
1 file changed, 48 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
new file mode 100644
index 0000000..86344f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
@@ -0,0 +1,48 @@
+QCOM BAM DMA controller
+
+Required properties:
+- compatible: Must be "qcom,bam-v1.4.0" for MSM8974 V1
+ Must be "qcom,bam-v1.4.1" for MSM8974 V2
+- reg: Address range for DMA registers
+- interrupts: single interrupt for this controller
+- #dma-cells: must be <1>
+- clocks: required clock
+- clock-names: name of clock
+- qcom,ee : indicates the active Execution Environment identifier (0-7)
+
+Example:
+
+ uart-bam: dma@f9984000 = {
+ compatible = "qcom,bam-v1.4.1";
+ reg = <0xf9984000 0x15000>;
+ interrupts = <0 94 0>;
+ clocks = <&gcc GCC_BAM_DMA_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+Client:
+Required properties:
+- dmas: List of dma channel requests
+- dma-names: Names of aforementioned requested channels
+
+Clients must use the format described in the dma.txt file, using a two cell
+specifier for each channel.
+
+The three cells in order are:
+ 1. A phandle pointing to the DMA controller
+ 2. The channel number
+
+Example:
+ serial@f991e000 {
+ compatible = "qcom,msm-uart";
+ reg = <0xf991e000 0x1000>
+ <0xf9944000 0x19000>;
+ interrupts = <0 108 0>;
+ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+
+ dmas = <&uart-bam 0>, <&uart-bam 1>;
+ dma-names = "rx", "tx";
+ };
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
