Jacek Thanks On 11/18/2017 08:19 AM, Jacek Anaszewski wrote: > Hi Dan, > > Please find my comments below. > > On 11/15/2017 08:42 PM, Dan Murphy wrote: >> Introducing the LM3692x Dual-String white LED driver. >> >> Data sheet is located >> http://www.ti.com/lit/ds/snvsa29/snvsa29.pdf >> >> Signed-off-by: Dan Murphy <dmurphy@xxxxxx> >> --- >> >> v3 - Add missing Makefile and Kconfig from v1 and v2 - https://patchwork.kernel.org/patch/10060075/ >> >> v2 - Added data sheet link, fixed linuxdoc format, returned on failure in init >> routine, return on fault_check failure, updated brightness calculation and >> fixed capitalization issue - https://patchwork.kernel.org/patch/10056675/ >> >> drivers/leds/Kconfig | 7 + >> drivers/leds/Makefile | 1 + >> drivers/leds/leds-lm3692x.c | 390 ++++++++++++++++++++++++++++++++++++++++++++ >> 3 files changed, 398 insertions(+) >> create mode 100644 drivers/leds/leds-lm3692x.c >> >> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig >> index 318a28fd58fe..1363e77a7d5f 100644 >> --- a/drivers/leds/Kconfig >> +++ b/drivers/leds/Kconfig >> @@ -137,6 +137,13 @@ config LEDS_LM3642 >> converter plus 1.5A constant current driver for a high-current >> white LED. >> >> +config LEDS_LM3692X >> + tristate "LED support for LM3692x Chips" >> + depends on LEDS_CLASS && I2C >> + select REGMAP_I2C >> + help >> + This option enables support for the TI LM3692x family >> + of LED drivers. >> >> config LEDS_LOCOMO >> tristate "LED Support for Locomo device" >> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile >> index a2a6b5a4f86d..987884a5b9a5 100644 >> --- a/drivers/leds/Makefile >> +++ b/drivers/leds/Makefile >> @@ -74,6 +74,7 @@ obj-$(CONFIG_LEDS_PM8058) += leds-pm8058.o >> obj-$(CONFIG_LEDS_MLXCPLD) += leds-mlxcpld.o >> obj-$(CONFIG_LEDS_NIC78BX) += leds-nic78bx.o >> obj-$(CONFIG_LEDS_MT6323) += leds-mt6323.o >> +obj-$(CONFIG_LEDS_LM3692X) += leds-lm3692x.o >> >> # LED SPI Drivers >> obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o >> diff --git a/drivers/leds/leds-lm3692x.c b/drivers/leds/leds-lm3692x.c >> new file mode 100644 >> index 000000000000..9fa7f5a20466 >> --- /dev/null >> +++ b/drivers/leds/leds-lm3692x.c >> @@ -0,0 +1,390 @@ >> +/* >> + * TI lm3692x LED Driver >> + * >> + * Copyright (C) 2017 Texas Instruments >> + * >> + * Author: Dan Murphy <dmurphy@xxxxxx> >> + * >> + * This program is free software; you can redistribute it and/or >> + * modify it under the terms of the GNU General Public License >> + * version 2 as published by the Free Software Foundation. >> + * >> + * Data sheet is located >> + * http://www.ti.com/lit/ds/snvsa29/snvsa29.pdf >> + */ >> + >> +#include <linux/i2c.h> >> +#include <linux/init.h> >> +#include <linux/leds.h> >> +#include <linux/regmap.h> >> +#include <linux/regulator/consumer.h> >> +#include <linux/module.h> >> +#include <linux/mutex.h> >> +#include <linux/of.h> >> +#include <linux/of_gpio.h> >> +#include <linux/gpio/consumer.h> >> +#include <linux/slab.h> >> + >> +#define LM3692X_LED_NAME "lm3692x_led" >> + >> +#define LM3692X_REV 0x0 >> +#define LM3692X_RESET 0x1 >> +#define LM3692X_EN 0x10 >> +#define LM3692X_BRT_CTRL 0x11 >> +#define LM3692X_PWM_CTRL 0x12 >> +#define LM3692X_BOOST_CTRL 0x13 >> +#define LM3692X_AUTO_FREQ_HI 0x15 >> +#define LM3692X_AUTO_FREQ_LO 0x16 >> +#define LM3692X_BL_ADJ_THRESH 0x17 >> +#define LM3692X_BRT_LSB 0x18 >> +#define LM3692X_BRT_MSB 0x19 >> +#define LM3692X_FAULT_CTRL 0x1e >> +#define LM3692X_FAULT_FLAGS 0x1f >> + >> +#define LM3692X_SW_RESET BIT(0) >> +#define LM3692X_DEVICE_EN BIT(0) >> +#define LM3692X_LED1_EN BIT(1) >> +#define LM3692X_LED2_EN BIT(2) >> + >> +/* Brightness Control Bits */ >> +#define LM3692X_BL_ADJ_POL BIT(0) >> +#define LM3692X_RAMP_RATE_125us 0x00 >> +#define LM3692X_RAMP_RATE_250us BIT(1) >> +#define LM3692X_RAMP_RATE_500us BIT(2) >> +#define LM3692X_RAMP_RATE_1ms (BIT(1) | BIT(2)) >> +#define LM3692X_RAMP_RATE_2ms BIT(3) >> +#define LM3692X_RAMP_RATE_4ms (BIT(3) | BIT(1)) >> +#define LM3692X_RAMP_RATE_8ms (BIT(2) | BIT(3)) >> +#define LM3692X_RAMP_RATE_16ms (BIT(1) | BIT(2) | BIT(3)) >> +#define LM3692X_RAMP_EN BIT(4) >> +#define LM3692X_BRHT_MODE_REG 0x00 >> +#define LM3692X_BRHT_MODE_PWM BIT(5) >> +#define LM3692X_BRHT_MODE_MULTI_RAMP BIT(6) >> +#define LM3692X_BRHT_MODE_RAMP_MULTI (BIT(5) | BIT(6)) >> +#define LM3692X_MAP_MODE_EXP BIT(7) >> + >> +/* PWM Register Bits */ >> +#define LM3692X_PWM_FILTER_100 BIT(0) >> +#define LM3692X_PWM_FILTER_150 BIT(1) >> +#define LM3692X_PWM_FILTER_200 (BIT(0) | BIT(1)) >> +#define LM3692X_PWM_HYSTER_1LSB BIT(2) >> +#define LM3692X_PWM_HYSTER_2LSB BIT(3) >> +#define LM3692X_PWM_HYSTER_3LSB (BIT(3) | BIT(2)) >> +#define LM3692X_PWM_HYSTER_4LSB BIT(4) >> +#define LM3692X_PWM_HYSTER_5LSB (BIT(4) | BIT(2)) >> +#define LM3692X_PWM_HYSTER_6LSB (BIT(4) | BIT(3)) >> +#define LM3692X_PWM_POLARITY BIT(5) >> +#define LM3692X_PWM_SAMP_4MHZ BIT(6) >> +#define LM3692X_PWM_SAMP_24MHZ BIT(7) >> + >> +/* Boost Control Bits */ >> +#define LM3692X_OCP_PROT_1A BIT(0) >> +#define LM3692X_OCP_PROT_1_25A BIT(1) >> +#define LM3692X_OCP_PROT_1_5A (BIT(0) | BIT(1)) >> +#define LM3692X_OVP_21V BIT(2) >> +#define LM3692X_OVP_25V BIT(3) >> +#define LM3692X_OVP_29V (BIT(2) | BIT(3)) >> +#define LM3692X_MIN_IND_22UH BIT(4) >> +#define LM3692X_BOOST_SW_1MHZ BIT(5) >> +#define LM3692X_BOOST_SW_NO_SHIFT BIT(6) >> + >> +/* Fault Control Bits */ >> +#define LM3692X_FAULT_CTRL_OVP BIT(0) >> +#define LM3692X_FAULT_CTRL_OCP BIT(1) >> +#define LM3692X_FAULT_CTRL_TSD BIT(2) >> +#define LM3692X_FAULT_CTRL_OPEN BIT(3) >> + >> +/* Fault Flag Bits */ >> +#define LM3692X_FAULT_FLAG_OVP BIT(0) >> +#define LM3692X_FAULT_FLAG_OCP BIT(1) >> +#define LM3692X_FAULT_FLAG_TSD BIT(2) >> +#define LM3692X_FAULT_FLAG_SHRT BIT(3) >> +#define LM3692X_FAULT_FLAG_OPEN BIT(4) >> + >> +/** >> + * struct lm3692x_led - >> + * @lock - Lock for reading/writing the device >> + * @client - Pointer to the I2C client >> + * @led_dev - led class device pointer >> + * @regmap - Devices register map >> + * @enable_gpio - VDDIO/EN gpio to enable communication interface >> + * @regulator - LED supply regulator pointer >> + * @label - LED label >> + */ >> +struct lm3692x_led { >> + struct mutex lock; >> + struct i2c_client *client; >> + struct led_classdev led_dev; >> + struct regmap *regmap; >> + struct gpio_desc *enable_gpio; >> + struct regulator *regulator; >> + const char *label; >> +}; >> + >> +static const struct reg_default lm3692x_reg_defs[] = { >> + {LM3692X_EN, 0xf}, >> + {LM3692X_BRT_CTRL, 0x61}, >> + {LM3692X_PWM_CTRL, 0x73}, >> + {LM3692X_BOOST_CTRL, 0x6f}, >> + {LM3692X_AUTO_FREQ_HI, 0x0}, >> + {LM3692X_AUTO_FREQ_LO, 0x0}, >> + {LM3692X_BL_ADJ_THRESH, 0x0}, >> + {LM3692X_BRT_LSB, 0x7}, >> + {LM3692X_BRT_MSB, 0xff}, >> + {LM3692X_FAULT_CTRL, 0x7}, >> +}; >> + >> +static const struct regmap_config lm3692x_regmap_config = { >> + .reg_bits = 8, >> + .val_bits = 8, >> + >> + .max_register = LM3692X_FAULT_FLAGS, >> + .reg_defaults = lm3692x_reg_defs, >> + .num_reg_defaults = ARRAY_SIZE(lm3692x_reg_defs), >> + .cache_type = REGCACHE_RBTREE, >> +}; >> + >> +static int lm3692x_fault_check(struct lm3692x_led *led) >> +{ >> + int ret, fault; >> + unsigned int read_buf; >> + >> + ret = regmap_read(led->regmap, LM3692X_FAULT_FLAGS, &read_buf); >> + if (ret) >> + return ret; >> + >> + fault = read_buf; >> + >> + if (fault) >> + dev_err(&led->client->dev, "Detected a fault 0x%X\n", >> + fault); >> + >> + return ret; >> +} >> + >> +static int lm3692x_brightness_set(struct led_classdev *led_cdev, >> + enum led_brightness brt_val) >> +{ >> + struct lm3692x_led *led = >> + container_of(led_cdev, struct lm3692x_led, led_dev); >> + int ret; >> + int led_brightness_lsb = (brt_val >> 5); >> + >> + mutex_lock(&led->lock); >> + >> + ret = lm3692x_fault_check(led); >> + if (ret) { >> + dev_err(&led->client->dev, "Cannot read/clear faults\n"); >> + goto out; >> + } >> + >> + ret = regmap_write(led->regmap, LM3692X_BRT_MSB, brt_val); >> + if (ret) { >> + dev_err(&led->client->dev, "Cannot write MSB\n"); >> + goto out; >> + } >> + >> + ret = regmap_write(led->regmap, LM3692X_BRT_LSB, led_brightness_lsb); >> + if (ret) { >> + dev_err(&led->client->dev, "Cannot write LSB\n"); >> + goto out; >> + } >> +out: >> + mutex_unlock(&led->lock); >> + return ret; >> +} >> + >> +static int lm3692x_init(struct lm3692x_led *led) >> +{ >> + int ret; >> + >> + if (led->regulator) { >> + ret = regulator_enable(led->regulator); >> + if (ret) >> + dev_err(&led->client->dev, >> + "Failed to enable regulator\n"); >> + goto out; >> + } >> + >> + if (led->enable_gpio) >> + gpiod_direction_output(led->enable_gpio, 1); >> + >> + ret = lm3692x_fault_check(led); >> + if (ret) { >> + dev_err(&led->client->dev, "Cannot read/clear faults\n"); >> + goto out; >> + } >> + >> + ret = regmap_write(led->regmap, LM3692X_BRT_CTRL, 0x00); >> + if (ret) { >> + dev_err(&led->client->dev, "Fail writing BRT CTRL\n"); >> + goto out; >> + } >> + >> + /* >> + * For glitch free operation, the following data should >> + * only be written while device enable bit is 0 >> + * per Section 7.5.14 of the data sheet >> + */ >> + ret = regmap_write(led->regmap, LM3692X_PWM_CTRL, >> + LM3692X_PWM_FILTER_100 | LM3692X_PWM_SAMP_24MHZ); >> + if (ret) { >> + dev_err(&led->client->dev, "Failed programming PWM CTRL\n"); >> + goto out; >> + } >> + >> + ret = regmap_write(led->regmap, LM3692X_BOOST_CTRL, >> + LM3692X_BRHT_MODE_RAMP_MULTI | >> + LM3692X_BL_ADJ_POL | >> + LM3692X_RAMP_RATE_250us); >> + if (ret) { >> + dev_err(&led->client->dev, "Failed programming BOOST CTRL\n"); >> + goto out; >> + } >> + >> + ret = regmap_write(led->regmap, LM3692X_AUTO_FREQ_HI, 0x00); >> + if (ret) { >> + dev_err(&led->client->dev, "Failed programming AUTO HI FREQ\n"); >> + goto out; >> + } >> + >> + ret = regmap_write(led->regmap, LM3692X_AUTO_FREQ_LO, 0x00); >> + if (ret) { >> + dev_err(&led->client->dev, "Failed programming AUTO LO FREQ\n"); >> + goto out; >> + } >> + >> + ret = regmap_write(led->regmap, LM3692X_BL_ADJ_THRESH, 0x00); >> + if (ret) { >> + dev_err(&led->client->dev, "Failed programming BL Threshold\n"); >> + goto out; >> + } >> + >> + ret = regmap_write(led->regmap, LM3692X_BRT_CTRL, >> + LM3692X_BL_ADJ_POL | LM3692X_PWM_HYSTER_4LSB); >> + if (ret) >> + dev_err(&led->client->dev, "Failed programming BRT CTRL\n"); >> + >> + return ret; >> +out: >> + >> + if (led->enable_gpio) >> + gpiod_direction_output(led->enable_gpio, 0); >> + >> + if (led->regulator) { >> + ret = regulator_disable(led->regulator); >> + if (ret) >> + dev_err(&led->client->dev, >> + "Failed to disable regulator\n"); >> + } >> + >> + return ret; >> +} >> + >> +static int lm3692x_probe(struct i2c_client *client, >> + const struct i2c_device_id *id) >> +{ >> + int ret; >> + struct lm3692x_led *led; >> + struct device_node *np = client->dev.of_node; >> + >> + led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL); >> + if (!led) >> + return -ENOMEM; >> + >> + if (client->dev.of_node) { > > We should fail in the opposite case. OK > >> + ret = of_property_read_string(np, "label", &led->label); >> + if (ret) >> + led->label = LM3692X_LED_NAME; > > LED label should be taken from the child node name if label property is > not present. See Documentation/devicetree/bindings/leds/common.txt. > > We have some mess in this area, but I'm going to sort it out soon > (added you on CC to the related discussion). > > Generally LED class device name should be composed by the LED class > driver by taking label and prefixing it with "[devicename]:" string. OK > >> + } >> + >> + led->enable_gpio = devm_gpiod_get_optional(&client->dev, >> + "enable", GPIOD_OUT_LOW); >> + if (IS_ERR(led->enable_gpio)) { >> + ret = PTR_ERR(led->enable_gpio); >> + dev_err(&client->dev, "Failed to get enable gpio: %d\n", ret); >> + return ret; >> + } >> + >> + led->regulator = devm_regulator_get(&client->dev, "vled"); >> + if (IS_ERR(led->regulator)) >> + led->regulator = NULL; >> + >> + led->client = client; >> + led->led_dev.name = led->label; >> + led->led_dev.max_brightness = LED_FULL; > > You can skip this line, it will be initialized to LED_FULL > in of_led_classdev_register in this case. OK > > >> + led->led_dev.brightness_set_blocking = lm3692x_brightness_set; >> + >> + mutex_init(&led->lock); >> + >> + i2c_set_clientdata(client, led); >> + >> + led->regmap = devm_regmap_init_i2c(client, &lm3692x_regmap_config); >> + if (IS_ERR(led->regmap)) { >> + ret = PTR_ERR(led->regmap); >> + dev_err(&client->dev, "Failed to allocate register map: %d\n", >> + ret); >> + return ret; >> + } >> + >> + ret = lm3692x_init(led); >> + if (ret) >> + return ret; >> + >> + ret = led_classdev_register(&client->dev, &led->led_dev); > > Please use devm_* prefixed version. OK > >> + if (ret) { >> + dev_err(&client->dev, "led register err: %d\n", ret); >> + return ret; >> + } >> + >> + return 0; >> +} >> + >> +static int lm3692x_remove(struct i2c_client *client) >> +{ >> + struct lm3692x_led *led = i2c_get_clientdata(client); >> + int ret; >> + >> + led_classdev_unregister(&led->led_dev); >> + >> + if (led->enable_gpio) >> + gpiod_direction_output(led->enable_gpio, 0); >> + >> + if (led->regulator) { >> + ret = regulator_disable(led->regulator); >> + if (ret) >> + dev_err(&led->client->dev, >> + "Failed to disable regulator\n"); >> + } > > mutex_destroy(&led->lock) OK > >> + >> + return 0; >> +} >> + >> +static const struct i2c_device_id lm3692x_id[] = { >> + { "lm3692x", 0 }, >> + { } >> +}; >> +MODULE_DEVICE_TABLE(i2c, lm3692x_id); >> + >> +#ifdef CONFIG_OF >> +static const struct of_device_id of_lm3692x_leds_match[] = { >> + { .compatible = "ti,lm3692x", }, >> + {}, >> +}; >> +MODULE_DEVICE_TABLE(of, of_lm3692x_leds_match); >> +#endif >> + >> +static struct i2c_driver lm3692x_driver = { >> + .driver = { >> + .name = "lm3692x", >> + .of_match_table = of_match_ptr(of_lm3692x_leds_match), >> + }, >> + .probe = lm3692x_probe, >> + .remove = lm3692x_remove, >> + .id_table = lm3692x_id, >> +}; >> +module_i2c_driver(lm3692x_driver); >> + >> +MODULE_DESCRIPTION("Texas Instruments LM3692X LED driver"); >> +MODULE_AUTHOR("Dan Murphy <dmurphy@xxxxxx>"); >> +MODULE_LICENSE("GPL"); > > According to your license info it should be "GPL v2" > OK Dan -- ------------------ Dan Murphy -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
