These device trees add support for the TS-4600 by Technologic Systems. More details here: http://wiki.embeddedarm.com/wiki/TS-4600 Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@xxxxxxxxxxxxxxxxxxxx> --- Changes v7 -> v8: - rebase on master - merge the rev A and B into one device tree based on the last rev B because only the memory size change between the two rev currently (suggested by Shawn Guo) Changes v6 -> v7: - rebase on master - remove unneeded pinctrl-name (suggested by Shawn Guo) - add reg to the node en-sd-pwr (suggested by Shawn Guo) - use define for gpio polarity (suggested by Shawn Guo) - remove the fake bus container for regulator (suggested by Shawn Guo) Changes v5 -> v6: - rebase on master - split the previous patch series into series by subsystem Changes v4 -> v5: - fix missing signed off Changes v3 -> v4: - rebase on master Changes v2 -> v3: - rebase on master Changes v1 -> v2: - rebase on master --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx28-ts4600.dts | 79 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 80 insertions(+) create mode 100644 arch/arm/boot/dts/imx28-ts4600.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d0381e9caf21..678373d299d8 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -558,6 +558,7 @@ dtb-$(CONFIG_ARCH_MXS) += \ imx28-m28cu3.dtb \ imx28-m28evk.dtb \ imx28-sps1.dtb \ + imx28-ts4600.dtb \ imx28-tx28.dtb dtb-$(CONFIG_ARCH_NOMADIK) += \ ste-nomadik-s8815.dtb \ diff --git a/arch/arm/boot/dts/imx28-ts4600.dts b/arch/arm/boot/dts/imx28-ts4600.dts new file mode 100644 index 000000000000..f37d81381620 --- /dev/null +++ b/arch/arm/boot/dts/imx28-ts4600.dts @@ -0,0 +1,79 @@ +/* + * Copyright (C) 2016 Savoir-Faire Linux + * Author: Sebastien Bourdelin <sebastien.bourdelin@xxxxxxxxxxxxxxxxxxxx> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx28.dtsi" +#include "dt-bindings/gpio/gpio.h" + +/ { + + model = "Technologic Systems i.MX28 TS-4600"; + compatible = "technologic,imx28-ts4600", "fsl,imx28"; + + memory { + reg = <0x40000000 0x10000000>; /* 256MB */ + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_sck_cfg + &en_sd_pwr>; + broken-cd = <1>; + bus-width = <4>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; + }; + + pinctrl@80018000 { + + en_sd_pwr: en-sd-pwr@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_PWM3__GPIO_3_28 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + }; + }; + + apbx@80040000 { + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pins_a>; + status = "okay"; + }; + + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + }; + }; + + reg_vddio_sd0: regulator-vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>; + }; + +}; -- 2.15.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
